Harbor Freight Tools that don't suck

[caver]

AvE does comparison of a Hazard Fraud polisher vs Milwaukee. NSFW

 

[LouNY]

AvE does comparison of a Hazard Fraud polisher vs Milwaukee. NSFW

I started to watch this video.
What is with these fools that have to cuse and use profanity constantly and then on top of that to just destroy tools and not do any kind of valid comparison.
What a complete waste

 

[newbury]

You need a small gauge rail tracked to the outside for those projects. That would be cool.

For casters, I have a few sets from Fastlane USA, here is a link for some of their 3 1/2 inch casters. $20 for a set of 2 swivel, 2 stationary. They have a bunch of other stuff too. I have received orders from them within 4 days.
Polyurethane 3.5" Wheel Plate Casters 4pc Industrial 2 Rigid 2 Swivel w Brakes 847227�797�5 | eBay

I had these on my BH (1,000 # ) dolly . Never had a problem with them, rolled real easy.

I've my 800 lb chipper on 3 HF moving dollies and my 5' tiller, about 600 lbs, on 2 dollies. They've stayed on concrete floor for years and I very occasionally push them a little bit so the wheels don't flatten. That's been going on for about 6 years. Back then I was getting them for about $6@, now they are up around $8@.

 

[stuckmotor]

Watch the dates on the coupons. Some of 'em ain't valid yet.

I can't even read the expiration dates on many of the coupons with progressive lenses. Before they started enclosing the magnifiers with alligator clips in plastic I used to use the ones in the store. Now I have to take a 5X from home or show the cupon to a clerk. She can read it without any apparent glasses.

 

[PJSprog]

I can't even read the expiration dates on many of the coupons with progressive lenses. Before they started enclosing the magnifiers with alligator clips in plastic I used to use the ones in the store. Now I have to take a 5X from home or show the cupon to a clerk. She can read it without any apparent glasses.

Hahaha ... it's just age. I still chuckle at myself when I'm struggling to read small print, then put on the cheaters and it's clear as day.

 

[LD48750]

Hahaha ... it's just age. I still chuckle at myself when I'm struggling to read small print, then put on the cheaters and it's clear as day.

That must be some set of "cheaters", my corrected vision is 20/20 & I have trouble even WITH a magnifying glass.

 

[5030]

I can now see ****.......... All in took was 2 lens replacements.

 

[Diggin It]

>>> WATCH VERY CLOSELY DURING CHECKOUT!!! <<<

They had to re-do mine twice today because they kept screwing up. Rang a couple of items twice, then didn't scan a coupon.

Last time they missed a coupon too, but it was only for a few cents, so I didn't bother.

 

[bcp]

I can now see ****.......... All in took was 2 lens replacements.

You are supposed to be looking at the coupon, not the clerk.

Bruce

 

[5030]

I started to watch this video.
What is with these fools that have to cuse and use profanity constantly and then on top of that to just destroy tools and not do any kind of valid comparison.
What a complete waste

+1..Guy is a vulgar mouthed idiot. Should be banned from You tube.

My favorite (tongue in cheek) of his 'comparisons' is where he takes a Bauer and another HF cordless drill and locks them together, chuck to chuck, one in forward one in reverse and with fully charged batteries proceeds to 'let the smoke out' and then curses about how poor the tool is. Common sense will tell you any motor with a locked rotor driving at full amps is gonna smoke pretty quick. What a dill rod.

Have to say I have those exact same 20 volt tools and I've yet to find the smoke, but then I exhibit some common sense.