Kawasaki Mule 2500 Replacement Parts ?

[PhilG327]

Can anyone provide names and/or links to companies that can supply replacements parts for my ancient Kawasaki Mule 2500? It's a 2WD model I purchased late last fall and it needs a some TLC. I need to replace the seat belts, windshield and roof. Previous owner wrapped the belts around the frame under the seat and they have hardened and taken a set. Can't get them to straighten out or adjust the length. The windshield is a large sheet of plexiglass that is cracked and discolored and the roof is a sheet of plywood. Not pretty.

Any advice or suggestions would be greatly appreciated.

Also, my wife hates that is has no doors or any sort of bar to prevent falling out. Kawasaki has some grab bars available, but I was hoping for something she could lean on. Ideas?

Thanks in advance!

 

[schultz548]

I have seen this on facebook I think he goes by the name Muleman. He lists lots of used parts. Search on the internet for Kawasaki Mule discounted parts/accessories should bring up a few that sell for a little less than retail. My first mule I think it was a 1998 550 2wd put lots of hrs on that. I got that thing stuck a few times just had knobby tires on it. Wife just bought a 2020 Mule 4010 Trans Cab 4wd it is nice. Me I still on my 2005 Kubota RTV 900 diesel fixing to put new tires on it shortly got them in my shop my just waiting to I motivate myself and do it. It got about 1500 hrs on it.

 

[Industrial Toys]

Can't you get some good belts at the wrecker?

I tied mine up and tucked them behind the seat from new and they have not been used once since 2000 or so.

Always thought about putting a handle on the passenger roll bar but doing it without drilling makes a whole nother project. You can grab on to the roll bar but it's not the most convenient. No one has died yet.

 

[PhilG327]

Thanks for the suggestion guys. Wisconsin outfit advertises on Craigslist that they are parting out ATVs and UTVs, but they have not replied yet. I once knew a guy who built roll cages, and I've been thinking I should try and track him down. My 2500 came with ag type tires so it goes everywhere. Even though it's 2wd. Lots of hills here in SouthWest Wisconsin. In fact, my place doesn't have a single spot of perfect level land on 25 acres

 

[Zebrafive]

I bought a roof for my 1996 2510 Mule from Sportsmans Guide, it was a universal fit, about $150

 

[radios1]

try here. 27 & Prior Kawasaki MULE 25 (KAF62-C3) OEM Parts, Babbitts Kawasaki Partshouse

 

[PhilG327]

Thanks for all the suggestions. I used some fabric cleaner on the seat belts and they are much more flexible now. Pried off the rubber cover on the buckles and a little WD40 got them working nicely now. Still searching for a windshield and a roof, though the plywood one came in nice and shady during the hot sunny days we've had lately.

 

[LouNY]

As far as safty bars, no ideas.
But as far as grab bars there are lots of clamp on hand grips to fir roll bars.
Amazon.com: Arsenal UTV ATV Grab Handle Hand Holds Black 1.75" to 2" Polaris RZR 9 XP 1 Turbo Kawasaki Arctic Cat Wildcats Can Am Maverick X3 Yamaha YXZ (4 PK): Automotive

 

[Zebrafive]

I bought a roof for my 1996 2510 Mule from Sportsmans Guide, it was a universal fit, about $150

Here is a picture of the roof on my Mule 2510

 

[PhilG327]

Nice picture Zebrafive. Looks like you're hauling the worlds largest bratwurst Looks just like what I need too. Thanks !