Tractors and wood! Show your pics

[Yogi05]

I dont really have a good pic of my whole place and saw yard.. here's a couple.. kind of hard to tell what stuff is.
In the one on the right the big white square is the barn roof, to the left and down from there a bit is the mill. some logs at the ready above and to the left and some bunks of wood here and there.

NICE !!!

 

[Yogi05]

Hunt, very nice property. Noticed some target setups. Great to have that at home.

I was envious of your work space so today I moved my mill.
Does that make you an internet "influencer"?? Lol

After talking to the landowner, who pointed out I'll never get my wood cut showing up at 10am , I got his permission to move my setup and cut trees. It's an area that's going to be cleared for something anyway, so 2 birds with one stone.
I walked through the trees and man they are tall and straight, but I'm not sure how many will yield even a 6x6 . There are some larger ones, but.....
And I can't really pick and choose because they all need to come down anyway (though it was supposed to be years away) and it's in a place where getting them out if select cutting would be a huge problem. If they're too small for me to use I told him I'll length them for firewood and put it aside. (not for home heating so species doesn't matter.)
What a friggin job moving all that crap. But now I have some space.
I took advantage of a few things I learned like putting trees to be cut over there, and throwing waste over here, and most importantly.... position the mill so I can load it from the correct side. Something I didn't know or think of at first. Not to mention where my finished stuff was going it was going to be a bugger to move.
I'm gettin' old, but I can still learn. Sometimes the hard way, sometimes easier.

 

[hunt4570]

Hunt, very nice property. Noticed some target setups. Great to have that at home.

I was envious of your work space so today I moved my mill.
Does that make you an internet "influencer"?? Lol

After talking to the landowner, who pointed out I'll never get my wood cut showing up at 10am , I got his permission to move my setup and cut trees. It's an area that's going to be cleared for something anyway, so 2 birds with one stone.
I walked through the trees and man they are tall and straight, but I'm not sure how many will yield even a 6x6 . There are some larger ones, but.....
And I can't really pick and choose because they all need to come down anyway (though it was supposed to be years away) and it's in a place where getting them out if select cutting would be a huge problem. If they're too small for me to use I told him I'll length them for firewood and put it aside. (not for home heating so species doesn't matter.)
What a friggin job moving all that crap. But now I have some space.
I took advantage of a few things I learned like putting trees to be cut over there, and throwing waste over here, and most importantly.... position the mill so I can load it from the correct side. Something I didn't know or think of at first. Not to mention where my finished stuff was going it was going to be a bugger to move.
I'm gettin' old, but I can still learn. Sometimes the hard way, sometimes easier.

View attachment 712247

Jeez... an internet influencer?? I'm thinking not...

I have three ranges here, a pistol range right up by the house, then out back a 100 and 300 yard range with a nice little shooting tower.

And yes I would think it would be a pain to move, and then get it all set up and level again, but I bet you will like the move!

For kicks, here is a thread on my shooting deck/tower/club house/fort thing... All the trees came off my place and were cut on my little mill.

New shooting deck

Alright, time to start on my shooting deck! I have backstop berms set out at 100 & 300 yards and now I need a place to shoot from so I'm building a deck out in the middle of nowhere. I'm also planning a second story deer blind up on part of it which will allow me to hunt this whole field. Like...

www.tractorbynet.com

 

[Molalla1]

Good one "Mr. Influencer" . . .

 

[hunt4570]

Good one "Mr. Influencer" . . .

Nooooooooo...

 

[Jstpssng]

Nooooooooo...

Now that you've achieved "Influencer" status you will need to check in more often.

 

[Yogi05]

Jeez... an internet influencer?? I'm thinking not...

I have three ranges here, a pistol range right up by the house, then out back a 100 and 300 yard range with a nice little shooting tower.

And yes I would think it would be a pain to move, and then get it all set up and level again, but I bet you will like the move!

For kicks, here is a thread on my shooting deck/tower/club house/fort thing... All the trees came off my place and were cut on my little mill.

I mentioned somewhere the property I'm cutting on is a shooting range. I run the members only side (1700 members) and the landowner runs a commercial side, renting to various law enforcement.

LE side

Member side

3 pistol bays (single lane) 20 yds
7 mixed use, rifle, shotgun, handgun. Up to 50 metres.
1 rifle range out to 200 metres.

90 acres total.
(our measuring tapes do metric and imperial in Canada )

 

[hunt4570]

Now that you've achieved "Influencer" status you will need to check in more often.

I just wish I still got notifications of replies and posts and stuff, sometimes I just forget.... I've tried everything to fix it to no avail.

 

[hunt4570]

I mentioned somewhere the property I'm cutting on is a shooting range. I run the members only side (1700 members) and the landowner runs a commercial side, renting to various law enforcement.

LE side
View attachment 712331

Member side
View attachment 712332
View attachment 712333

3 pistol bays (single lane) 20 yds
7 mixed use, rifle, shotgun, handgun. Up to 50 metres.
1 rifle range out to 200 metres.

90 acres total.
(our measuring tapes do metric and imperial in Canada )

I too run a shooting range.. 100 acres.. and one member... me!

 

[Skeans1]

I just wish I still got notifications of replies and posts and stuff, sometimes I just forget.... I've tried everything to fix it to no avail.

Are you using Tapatalk?