Bailing on steep fields
- Thread starter Agvg
- Start date
- Views: 4198
cqaigy2
Super Member
More pictures please.
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,071
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Bet rolling farm fields along with autumn leaves are something to see.
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,993
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Round bales could become projectiles quick
CH4Ohio
Veteran Member
At least you wouldn't have to chase them all over the field. Looks like they'd end up in a pretty tight group at the bottom.
Hay Dude
Super Star Member
- Joined
- Aug 28, 2012
- Messages
- 18,721
- Location
- A Hay Field along the PA/DE border
- Tractor
- Challenger MT655E, Massey Ferguson 7495, Challenger MT535B, Krone 4x4 XC baler, (2) Kubota ZD331’s, 2020 Ram 5500 Cummins 4x4, IH 7500 4x4 dump truck, Kaufman 35’ tandem 19 ton trailer, Deere CX-15, Pottinger Hay mowers
We do some crazy steep stuff. Other guys don’t have the balz to do it.
^^^^^
At the bottom of this steep hill is a 10’ drop off into a 2 lane road. There’s no flat area to make a headland or turn around.
Below: This hill has you hanging on pretty tight. Feels like the baler could tip and “gator roll” the tractor and me with it.
^^^^^
At the bottom of this steep hill is a 10’ drop off into a 2 lane road. There’s no flat area to make a headland or turn around.
Below: This hill has you hanging on pretty tight. Feels like the baler could tip and “gator roll” the tractor and me with it.
Last edited:
oldnslo
Super Member
Hay dude
Are those big square balers as top heavy as they look? I have only been up close to one and it sure looked like center of gravity would be way above the axles.
Are those big square balers as top heavy as they look? I have only been up close to one and it sure looked like center of gravity would be way above the axles.
Hay Dude
Super Star Member
- Joined
- Aug 28, 2012
- Messages
- 18,721
- Location
- A Hay Field along the PA/DE border
- Tractor
- Challenger MT655E, Massey Ferguson 7495, Challenger MT535B, Krone 4x4 XC baler, (2) Kubota ZD331’s, 2020 Ram 5500 Cummins 4x4, IH 7500 4x4 dump truck, Kaufman 35’ tandem 19 ton trailer, Deere CX-15, Pottinger Hay mowers
they’re pretty stable. The Hesston is very basic. It rides on 2 huge balloon tires and it sticks pretty good on hills. Its only about 24,000lbs.
The Krone is much heavier-about 38,000lbs. It has a steering axle in back and a fixed axle on the front. Both axles have brakes. When you run along a hill, the back axle tends to let the back end of the baler angle downhill if it’s unlocked. I think I will start locking the rear axle along hill sides.
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,649
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
Oh yeah. When I help bring in the rounds for my friends in Pyengana, a number of fields are like this.
I typically do the 'fetch and carry' job with my little (compared to theirs) 4105; there's a LOT to be aware of when doing that. First there's the slope and 'angle of attack' of picking up the round, you have to back down the hill to the collection area. BUT you also have to be aware of where the baler is and if it's ejecting a new round... because if that round starts rolling you need to figure out where it's going and calculate/make sure you get out of its way!
Fun stuff.