Landscape Rake, need opinion !

[Scrambler82]

I'm thinking on buying a Landscape Rake.
Looking at the "Tarter 6 Foot Landscape Rake 200 Series !

Wondering if anyone had a comment, please feel free !

Thanks
GOD Bless

 

[Thomas]

Check out York rake with drop down grader blade.

 

[Sportsman762]

The Tarter / King Kutter / Countyline rakes are all economy rakes. York rakes are considered the best of the best they are built heavier and have more options.

York Rakes, Dethatchers & Landscape Equipment | York Modern Corp.

York Rakes, Dethatchers, Rotary Brooms, & other landscape equipment are some of the most integral designs on the market. We build our equipment to last and back it with service.

www.yorkmodern.com

Not sure what your doing so it makes it hard to provide advice. Economy rakes could work for a low volume user or one doing light duty activities such as windrowing river rock in loose dirt. But if your using it on miles of roads then a york might be better.

Same can be said for options. Gauge wheels are common options as they help reduce undulations. Scarifiers, or drop down grader blades are less common options and only available on the HD rakes.

 

[steve tym]

I had an economy rake (different brand) and used it about 1200' (yes, I measured it). It was bent like a smiley face and some of the tines were bent like they didn't make them out of spring steel. The manufacturer said I put too much down pressure on it (I can't control that, it's a gravity thing). They refused to warranty my brand new $1,200 rake. I threatened the dealer I would never do business with them again if they didn't take it back, they did and I felt bad for them. Replaced it with a land pride I paid four times as much for. If the dealer hadn't taken it back, I would been stuck with $1200 in scrap iron.

 

[chris the wrench]

Reviving this thread.

I need a rake for cleaning up pine needles and small sticks. I don't need it for dirt, rock or soil work. Our property is not level and not a consistent pitch(lots of dips and rises). Would the tractor supply $800 rake work, or will i be cussing that purchase. Perhaps adding some gauge wheels…

 

[oldnslo]

If doing pine needles and small branches a pine needle rake may be a better choice than landscape rake.

 

[rScotty]

Reviving this thread.

I have a Woods Landscape Rake with gauge wheels and the flip down grader blade. This is the heavily built one, and is solid quality. Only problem with it is so far I haven't found anything it will do well - but I bought it used for such a good deal I keep trying. l did loan it out to a guy trying to improve his roping arena & he didn't find it useful either. There has got to be something it is good for, but so far nobody I know has found what that is.

My feeling is you won't get much use from it unless your land is level. Otherwise it will just scalp the high points and dump trash in the low areas. Now if you did that long enough on bare dirt I still think it might help level things out. But you need a large area to work it like that. An acre or two at least. The longer the better. If you are maintaining a horse track like the Kentucky Derby, I bet it would be just the ticket.

Warning.... rakes will hit a stone or root every now and again - it's the nature of the implement. They need to be seriously strong or they well get bent up quickly. The good ones have heavy spring steel rake teeth, and they will chuck a rock at you occasionally, so be aware of that. To avoid throwing money away, get a good one. They start at about 3K for a seven footer.

Let me know how it works out.
rScotty

 

[Scrambler82]

Reviving this thread.

I need a rake for cleaning up pine needles and small sticks. I don't need it for dirt, rock or soil work. Our property is not level and not a consistent pitch(lots of dips and rises). Would the tractor supply $800 rake work, or will i be cussing that purchase. Perhaps adding some gauge wheels…

I purchased the 60" version of the Tractor Supply Landscape Rake.
Purchased it on sale plus Military Discount, got it for under $800.00.

All I can say about this tool is why didn't I buy one long before this. This tool work great at clearing low brush, leveling the driveway, leveling dirt, and I used it to clean up the bottom of a large pile of stone that had settled in the ground. The stone had imbedded the lower stone in the ground and a hand rake wasn't doing anything, shoveling brought up too much dirt. I decide one day to try it on the bottom of the stone pile... WHAM>>> BAM, it did a great job pulling stone that I didn't even thing was left behind.

Overall light weight or not, it does the job I needed to get done and so much more.

p.s. This is the second tool I have purchased from Tractor Supply, the first is a Brush Cutter, both tool have over produced, great tools and I work these tools beyond what they have been designed for.

 

[nyone]

I have about a 10yr old tractor supply rake. It was starting to bend due to the way it's made. When the pivot connects directly to the bar that holds the rake teeth this is bound to happen. I welded a section of angle across the top. Not allowing the bar to bend. Yes I keep the 100lb suitcase weight on there full time and have every other tooth removed.

 

[Jrasband]

Land Pride makes a good sturdy rake too. I had a rake I used on my 32 hp LS and it was one of my favorite implements. I have missed it since my LS died. Great at bringing the gravel back up in the driveway - amazing at clearing brush and brambles - excellent at prepping cleared land for seeding - excellent at leveling land as well.