Kontak Directional Control Valves

[William McNett]

Any idea where to find information on Kontak valves in the US?

 

[J_J]

Browsing for KONTAK V8000 1/2 BSP VALVES & PARTS

 

[William McNett]

I've been on that site. They are located somewhere in the UK/England and they don't have any information, only parts if you have part numbers.

Problem being, Kontak Hydraulics became Commercial Hydraulics which is now Parker.
The valve I have is on my Brantly LD6 backhoe that is on the Magntrac MT2016 I bought a few months ago.
I'd really like to find a manual, a source for seals, boots for the joysticks, a pressure relief valve, & a plug to replace the power beyond fitting.

I believe it is a Kontak Unit 10 which became Commercial KA10 which is now a Parker KA10.

http://www.winget.co.uk/document/SERVICE MANUAL KONTAK CONTROL VALVE.pdf
Parker - KA10, 240 BAR (3500 PSI), 55 LPM (15 GPM), SECTIONAL CONSTRUCTION
http://www.hypneu.de/cms/fileadmin/...il/MCD/Catalogs/GENERAL/Mobca_Uk/_4-2KA18.pdf

 

[Tyrotownship]

Did you ever find any info on Kontak valves? I'm in the same boat. Parker owns about every hydraulic parts supplier out there but unfortunately their web site is terrible.

 

[William McNett]

Yes there's an older valve and a newer valve
I emailed someone at parker and he put me in touch the someone from parker in europe, he send me some prints and part lists.
The one O-ring I couldn't find in the correct hardness, Parker wanted something like $50 for the 7 I wanted.
I bought a few pieces from White House Products Hydraulic Gear Pumps | White House Products | Hydraulic Pumps in which coming from over the pond was sill cheaper than buying from Parker.
I'll do some searching and see if I can find the docs I have which may be on an old hard drive somewhere around here.

Bill

 

[William McNett]

View attachment KA18-HA300-FCL.pdf

the o-rings between the sections
Parker part = 3460500071 / Dowty Code = 200-019-4490 2 per kit
Parker part = 3460500893 / Dowty Code = 200-020-4490 1 per kit
Parker part = 3460501131 / Dowty Code = 202-518-4490 1 per kit

I don't think I ever found the wiper/seal thats under the cap/around the spool but it's been 4 years :laughing:

 

[William McNett]

KA10/KA18 Spool sealing
Counterbore to take o-ring/ wiper
Kit No. 3469149103 (2x seals/ 2x wipers)


Unit 10/18 Spool Sealing
Groove to take o-ring
Kit No. 3459149003


UNIT 10 MRV (1 1/16 UNEF THREAD)
3459001001 = Pressures between 35 and 100 bar
3459002001 = Pressures between 101 and 275 bar

 

[Tyrotownship]

Thanks for all the info. What I'm after is the power beyond fitting for my Kontak valve. My valve has a 3/4 BSP port where the power beyond fitting threads into. Any chance you still have your fitting?

 

[William McNett]

Yes but it's in use.
There is a valve bank on ebay that may or may not have that fitting.
or V8024 | HYDRAULIC VALVES & REMOTE CONTROL CABLES | White House Products

 

[Tyrotownship]

I see that, assuming you're referring to

Bank of 5 Kontak Control Valves | eBay

Looking at this picture of it, this is where I would expect the power beyond fitting and I don't see it.