A little up date on input shafts seal leaks

   / A little up date on input shafts seal leaks #1  

Leejohn

Elite Member
Joined
Sep 16, 2007
Messages
4,047
Location
Doniphan, Mo.
Tractor
Kubota L4240, B7800 & BX2660
This is a update on this post. http://www.tractorbynet.com/forums/...plitting-kubota-gl4240hst-4wd.html?highlight=

I found out after replacing the 4wd and input shaft seals 3 times and with the latest seals and housing. Don't over look keeping the Hyd front cooler clean, I was not doing a good job at keeping it clean and would get a drop or 2 after running a good while. After keeping it clean have not seen a drop at all.
,
 
   / A little up date on input shafts seal leaks #2  
thanks for the reminder.
 

Tractor & Equipment Auctions

1998 John Deere 4300 4WD Tractor (A49251)
1998 John Deere...
2018 INTERNATIONAL LT625 TANDEM AXLE SLEEPER (A45679)
2018 INTERNATIONAL...
2014 Utility Trailer 4000DX 53ft. T/A Dry Van Trailer (A48081)
2014 Utility...
2015 KENWORTH T800(INOPERABLE) (A48992)
2015 KENWORTH...
Wolverine BC-13-72W, 72" Skid Steer Brush Cutter (A47371)
Wolverine...
Hiniker 15’ Stalk Chopper (A47369)
Hiniker 15’ Stalk...
 
Top