On my LB2204 when I have been running the tiller for more than a half hour or so I get hyd. fluid leaking out of the top of the trans. It is not a tremendous amount, but enough to make the pedals and steps slippery! I assume the fluid is expanding as it gets hot? Am I overfilling it or maybe a...
I'm thinking of aquiring a l245dt from a friend of mine that has a problem- it will turn left just fine, but when you try to turn the steering wheel right the wheel and shaft spin up and out of the column! I'm guessing that something in the gear is RF'ed, obviously, but not sure what it is...
My LB2204 has been overcharging and until I can obtain a new regulator I have been turning the key to the off position while using it. Other than not having guages, which aren't working anyway, am I causing any problems? When I turn the key off the engine actually speeds up a bit and I assume it...
Put my meter on the battery while the engine was running on my recently purchased LB2204 and getting 16-17 volts. The battery is old and had a static charge of 11.5 before I hit it with the charger overnite and got it up to 12.5. Could the regulator be compensating for a bad battery or is it...
I bought the LB2204 Kioti that I was asking questions about previously and so far I am impressed with it!:thumbsup: I would like to get a mower/brushcutter for it at some point and was wondering what size it can handle. Most of the ones I have seen are 5 footers. Will a 5' work or is it too big...
I have checked the wiring to the oil pressure switch on the lb2204 that I have been looking at buying and it is all intact. So now I would like to hook up a mechanical guage to see the actual pressure. my question is what are the threads at the sending unit? Are they metric or standard pipe...
Hello all- this is my first post and I have a few questions! I am looking at buying a 1987? Kioti lb 2204 from a neighbor. It has 333 hrs according to the meter, so obviously it has sat around a lot. My concerns are as follows: the low oil pressure light stays on at low or higher rpm's and never...