Absolutely consider a deckover. Pequea makes a standard duty model 7k and 10k that aren't as heavy. I haul all kinds of different stuff from pallets of wood pellets, cars,farm equipment to materials. Very handy. Yes load height is higher but it hasn't been an issue yet.
Wondering the consensus on binding/strapping a vehicle to trailer "hook to frame and load suspension" or "hook to axles/suspension"
I've trailered couple Wranglers and have always used axle straps and hooked straps to axles. I will be trailering Jeep liberty which is independent front...
Big Tex 70 CH with EZ lube spindles,one wheel and spindle to hot to touch after 100 miles of 65 MPH.With grease squrting out of rubber cap. Other 3 just normal to touch.I just adjusted brakes & greased according to instruction via the EZ lube zerk fitting.
I jacked it up and bearing felt smooth...
Previously i towed small trailers without brakes or rentals with surge. I just bought a Big Tex 70CH with electric brakes. Installed a Prodigy controller. I tow with 1/2 ton Avalanche 4X4.
I am very pleased with set up. Towed my sons Jeep nd couple tons of wood pellets no problems. I have a 6 X...
Anybody have experience with the York Basic line of rakes? Local dealer carries them and wants 620.00 for 5' model. Compared to 429.99 for 5' CountyLine at TSC. I looked at the York one and since I really don't know what I'm looking at I figured I'd ask here.
Thanks
Rob
Going to look at a 2007 T233 with 65 hrs. It has FEL & 60" mmm. I like the spec's of the T233 but would like to know how it works as a mower?
Thanks
Rob
Called on a 2003 4110 yesterday and owner say's 3200 hours. That seems very high. That would be 400 per year.
He say's it is in very good condition. It has FEL, 60" mmm & ballast box with r4's
It is three hour ride to look at it. He's asking $9900.00
Is it worth looking at.
Rob
Went to look at a 04 4110 with 157 hrs hydro,R4's, with FEL 60"mmm and ballast box it is in excellent cond
Guy is asking 13,500 which I think is high
What say ye
Thanks
Rob
Hello
Happy Memorial Day!
Looking at buying first CUT. Looking at all brands but have a slight JD preference. I have a 420 L & G tractor now and have always been happy with it.
I have been reading up on various models and seems either newer tractors can lift more with same Hp or older models...
Hello
I am starting to look at buying my first CUT. I am leaning towards HST trans but one question has come to mind. Does HST multiply the engine torque like a manual does? Even in automotive auto trans the torque converter does some multiplying.
Is this even important in a little tractor...