4570Man's latest activity

I’m not seeing it as being that hard. The skid steer has no shortage of pins to grease and they’re every one recessed. If they weren’t...

I use a screwdriver to scrap out enough dirt that I can get the nozzle seated in place and call it good. I don’t bother cleaning them to...

I don’t think any manual is calling for grease on the loader pins every 50 hours of actual use.

What are they going to do when they catch them? You can send all the fines you want but you’re just going to make more trash for illegal...

With an excavator you pretty much are doing exactly that. I like to grease the bucket pin every 3-4 hours and the rest of the machine...

The Exxon moly is only about $1 a tube premium over the regular blue grease. I feel like it works enough better to justify that.

I know it’s not a legal requirement but I see post on the local facebook group pretty much everyday of someone who hired a “contractor”...

My plastic tubes still have the foil pull tab.

2 of mine are people calling everyone that works outside “contractors” when the vast majority of them are not licensed contractors. The...

Red and tacky sucks. It leeches oil and runs all over the place. This Exxon grease doesn’t do that and cost about the same as red...

It retails for $169 bare tool or $230 with a battery and charger.

I guess that’s ok if the FEL only sees 5 hours use out of those 50. 50 hours is woefully inadequate for pin grease if you’re actually...

I like to grease my skid steer and excavator bucket pins every 1/2 tank of fuel and the rest of the pins every tank of fuel. I’m not...

Mine works great. I glued a disc level on the head so can set it some degree of level and the auto level function does the rest. A...

How do you not do all that shifting short of just staying in a low gear for the whole job and driving around at a snail pace?