aa2tn's latest activity
-
AEver notice some people have trouble with everything? And others have few,if,any problems at all? Hmmm!
-
Aaa2tn reacted to bowenskye's post in the thread Grease - is there no better way? Can we talk about this? with
Good Post.
I leave the canister, that holds the grease tube, a little loose, so that air can escape. -
Aaa2tn replied to the thread Grease - is there no better way? Can we talk about this?.Just leave the cover a bit loose when you install a new tube of grease until the grease comes out the tip then tighten ...
-
Aaa2tn reacted to masseyrider's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Years ago I was doing some tractor work for a local nursey. I was supposed to go and rototill a field for planting. I hitched up and...
-
Aaa2tn reacted to 4570Man's post in the thread I Went To Purchase A New Mini-Excavator And This Happened..... with Good Post.
That just looks like dirt from sitting outside on the dealers lot for a couple months to me. They could have used a power washer on that...
-
Aaa2tn reacted to dusty3030's post in the thread I Went To Purchase A New Mini-Excavator And This Happened..... with Good Post.
It’s been sitting outside for a long time for sure. Nothing is gouged below air cleaner that’s a flexible heat shield / blanket it...
-
Aaa2tn reacted to scootr's post in the thread I Went To Purchase A New Mini-Excavator And This Happened..... with Good Post.
7 hours is probably 1/1000 of its useful life. I once bought a 2 yr old rental unit with 1500 hrs on it. It had dents and scratches on...
-
Aaa2tn reacted to Tpondel's post in the thread I Went To Purchase A New Mini-Excavator And This Happened..... with Good Post.
Used only on Sunday by old lady on way to church?
-
Aaa2tn reacted to pmsmechanic's post in the thread I Went To Purchase A New Mini-Excavator And This Happened..... with Good Post.
So let me get this right. You had what you wanted except that it had a few more hours on it than you were expecting and it was a bit...
-
AWhen I got my b7800 from the neighbor after sitting for 6 years outside, we put fresh diesel in the tank and it started right up ran for...
-
AOnce you have owned an excavator, you would sooner part with your wife than the excavator.
-
Aaa2tn reacted to Tomtint's post in the thread Buying an excavator with resale in mind with Good Post.
I bought a 1 owner 7k hour KX121 for something like 17k a number of years ago..did basic maintenance and put another 400 hrs on it over...
-
ANot your fault. Those things are terrible to install. I ended up heating one in near boiling water and still fought it. Of course it was...
-
ASounds like you either crossed some lines during reassembly or you have crossed the quick disconnects. You may want to double check that.
-
Aaa2tn reacted to rbstern's post in the thread Mounting a rear work light on the MT225E (XG3025), with questions with Good Post.
There are many types of 16ga wire, not all are rated the same, and at the lengths involved here, it will handle additional amps without...