adlertom's latest activity
-
adlertom replied to the thread New Woods rotary cutter - can't slide the plastic PTO guard out of the way.Well, it wasn't easy, but I was able to attach the PTO shaft to the tractor without sliding back the guard. When I next get to the... -
adlertom replied to the thread New Woods rotary cutter - can't slide the plastic PTO guard out of the way.Because that large cover makes access more difficult.
-
adlertom replied to the thread New Woods rotary cutter - can't slide the plastic PTO guard out of the way.No, with the positions spread out so widely around the guard, I don't see how I could push on all 3 simultaneously.
-
adlertom posted the thread New Woods rotary cutter - can't slide the plastic PTO guard out of the way in Attachments.I can't move/slide back the PTO guard on my new Woods BB60.30 rotary cutter. There are three positions on the guard, 120 degrees...
-
-
adlertom replied to the thread TC33DA - adding oil slowly to avoid engine damage?.Thank you @Halftrack ! So, it looks like adding new oil at a rate less than about 2 quarts/minute is the recommendation. I'll go...
-
adlertom reacted to Halftrack's post in the thread TC33DA - adding oil slowly to avoid engine damage? with
Good Post.
Official Service Bulletin- -
adlertom replied to the thread TC33DA - adding oil slowly to avoid engine damage?.Excerpts/photos attached from the Shibaura engine manual. So, it looks like the issue may be for other Shibaura engines, not...
-
-
adlertom posted the thread TC33DA - adding oil slowly to avoid engine damage? in New Holland Owning/Operating.I would like to change the engine oil in my TC33DA with a Shibaura N843 3 cylinder diesel engine. I've read that when adding the new...
