Recent content by Ag-lad

Couldn't spot a drain or inspection plate on flywheel housing. Drained crankcase this AM and refilled to mid mark on dipstick. Transmission level at just full mark. The last time I used the tractor; after shutting down, the level was at mid mark, but after sitting for a few days, oil level came...

Don't know if there is an inspection plate or drain for the flywheel housing, I'll look for that later. I have changed engine oil and after about 40 hours on grain auger during harvest, oil level above max on dipstick. Drained oil again, sent sample for oil analysis (test results OK/no...

Hydraulic pump is at the rear of the transmission. This is a NH Plus model with 16 X 16 PS transmission with variable displacement pump at rear of transmission housing. There is no clutch on the flywheel, transmission and PTO are driven by a damper bolted to the flywheel. C3 and C4 clutch...

I don't think that there is any pump mounted on the engine. Transmission oil cooler located at front of radiator. This tractor does not have a friction clutch, the transmission is driven by a damper plate bolted to the flywheel. What I'm wondering, is the flywheel immersed in oil and could the...

Oil level in crankcase rising. Oli analysis indicates no fuel contamination. I'm assuming that transmission oil is leaking in. tractor is a 2009 Plus model with 16 X 16 transmission, about 3500 hours, that uses the variable hydraulic pump. I'd like to know where the leak is occurring. Anyone...