Recent content by Agentiron

I want to hear creative uses you have found for your 4n1 bucket. Thanks AI

I might have a bad cell in the battery of my ck20. It won't click when I try to start, but I get a buzzing noise when I turn the key. I can hook up a jump box and this will get the lights to come on the control pannel, but no start. I get 12.5 volts on the battery with no load, but assume it...

Does anyone know if the mini skid buckets will mount on a Kioti ck20? I would think the mini skids would be stadardized, but I don't know for sure, and don't know if the mounting system is the same? I would really like a larger light material type bucket for moving mulch and stuff like that. Any...

I was wondering if a ck20 will have the flow to use a 4n1 bucket effectively? I also wonder if there will be any significant weight issues with it. The Long 4n1 does not appear that heavy, and it seems some of the small Kubota tractors have them on them. Any thoughts or experience would be great. AI

I need to really lower my ground pressure for working in residencial yards. The Industrial tires are just to much on a slightly damp or soft yard. I have been considering a Toro Dingo for these applications, but really like my ck20 as well. Any idea what kind of psi I can get with Turf Tires...

I have never seen a Renovator in person, but wondered if it could replace a pulverizer for some soil preparation and leveling? I sure like the idea that it can seed new and exisiting lawns. Does anyone have any input on how it does as an overseeder? Thanks AI

I was wondering if anyone has used a pulverizer with a ck20? To me, it is not very strong with ground engageing tools, but wondered if anyone could comment on how it would handle a pulverizer, and what size I could expect to work well with my ck20? Thanks a bunch AI

I have used my hoe 15 or 20 times the past year and a half. The controls have become very sloppy but workable. I get two large trees to a site to plant, and grab the right hand control on the hoe, and it falls off in my hand. On one of the swivel balls the nut has fallen off, and the other bolt...

I need a real fix for this sticking pedal, not a cob job fix, but a permenant fix. When I purchased the unit they drilled a hole in the top of the "bushing" next to the hst pedal. They said put penatrating oil in in occasionally. Any time it rains, it locks up. I can put a half a can of...

I want to pick up some cheap stake pockets to put on my carryall. Some of the posted pictures look great. I can not find true stake pockets that will receive a 2x4. Does anyone know of a source? Thanks fellas. AI

How big of a post hole digger can I run on a ck20 in heavy clay? I would like to have at least a 12" auger. Any reccomendations on a brand that gives me a variety of auger's both in diameter and length? I really need to go at least 3 foot. Thanks AI

I need to get a post hole digger for my ck20. What size of an auger can one effectively run in heavy clay with a ck20? I have some sand areas, but also work in clay as well, and want to get something I can use in both types of soil. Any reccomendations on types of units that would work well with...

Just below my hst pedal is a rotateing knuckle, the knuckle has a piece of steel that comes off the bottom that allows front to rear pivoting which links to the hydros for forward and reverse. I was lubricateing the linkage as the tractor wanted to continue forward or reverse rather then...

I have owned my ck20 since early spring. I was very hesitant to get such a small tractor but found such a good deal that I could not pass it up. It was just big enough to dump in my dump truck, and small enough to get on both my trailers so I took the plunge. I attribute my decision to the input...

I have a ck20 that I dearly love, but have had my throttle lever sticking of late. It does not throttle down right away when you move the throttle back. It will ususally do so, but may take several seconds. When throttling up, it does not always increase rpm's as you would expect it to, but may...