That looks to be what I need @Sportsman762! I did a little research and pioneer fittings will flow 12GPM, so I think that manifold is sized correctly.
https://ph.parker.com/us/en/product-list/quick-couplings-hydraulic-up-to-3000-psi-iso-5675
Appreciate the help and I'll update once I have it in
Sorry for the confusing description @Sportsman762, hopefully I can give a better explanation of what is going on.
The two hoses pointing downward from the manifold attach to the tractor SCV. There are tow pairs of hoses on the top of the manifold block. One pair goes to one hydraulic motor...
I have a older Lode King seed tender that has 2 hoppers. We use it to fill our seed drill with grain and fertilizer. The manifold has quit working on the seed tender and I need to figure out a replacement for it.
The manifold works by attaching to tractor hydraulics, and tractor battery for...
Tractor is used for field work, but since the last hydraulic oil change it has really only been used on the disc bine. When running the disc bine tractor always runs cool. Needle on temp gauge barely makes it to the green mark. Maybe it isn't getting hot enough to burn off the condensation? Or...
My main concern was that somehow coolant was entering the hydraulic system, but it sounds like that's not possible. I know the tractor hasn't been out in the rain so it can't be coming in that way.
I was getting a transmission light before the last time I changed the oil. Since then it has...
I had wondered the same thing, so I sent out a oil sample to be tested. Came back showing water present.
When the oil sits in a clear jar it looks slightly milky no matter how long it sits. From the research I've done, apparently water won't separate out due to the additives in modern oil.
It's a quad range transmission and I have been draining the clutch housing.
Tractor does sit in a shelter when not being used.
How can I check the filler cap breather?
A while back I hooked up to my cultivator. Turned out one of the vertical mounted cylinders had a seal fail, and taken on water. When I cycled the cylinders I contaminated the tractor hydraulic fluid with water.
I initially drained the fluid and refilled with new fluid. I drove the tractor for...
Our John Deere 4440 needs one new back tire. It currently has a nearly new rear radial on one side, but needs a new tire on the other.
After calling around for prices; a new bias tire costs about $900, while a new radial is close to $2000.
I'd obviously prefer the radial but that is a...
I was using our 1996 7410 and the alternator light started flashing on the dash. Shut it down and completely lost all electrical when I went to restart it. Came back a couple hours later, all power came back and started right up. Just yesterday went to use it and the electrical not...