Recent content by All In A Days Work

This morning I made a modification to our tractor so I can control the throttle from the backhoe operating position.

Good morning from North Central Washington. Lots of folks around here living out in the woods are having their insurance canceled.

Thanks guys, I appreciate your input.

I just purchased a BH92 for my L4701. In the operators manual it states " While BH92 backhoe is installed on the tractor, liquid ballast in the rear tires should be removed". That's a problem as I have my tires filled. I really don't want to remove the beat juice from the tires. There is no...

No, jacked up, tires were off the ground.

I wanted to say thanks to everyone for all the suggestions and comments on the tire problem. It sure was safer and in the end, an all-around better solution.

This the first time I have let air out, matter of fact this the first time I added air, and wouldn't you know it I added to much. 😵‍💫

And another thing if I had taken them off and adjusted the air, I would still have the problem of having too much Rim Guard next time I wanted to adjust the air.

I drained the Rim Guard today and Boy that took a while. Sorry @gstrom99 no video. On the second tire it wasn't bad, but the first one didn't work as planned. I finely got them drained enough that I could let air out, 10 gallons of Rim Guard later. It took up most of the afternoon. I did...

My friend finally got notice that the oil filter he has had on order for 6 weeks has shipped.

I agree with everything but the cherry picker, now maybe if you had a super high quility one. Know one I know owns one of the cool ones I've seen on line. I'm not overly impressed with the stability of the one I have. If all I needed to do was lift the tire that would be one thing but...

A 2012 Ford F350 DRW, here is a photo from this last summer.

I have a couple of jack posts, that I can put in place just for this type of thing. I'm not concerned with the beam breaking. And with the winch setup like a hoist, I'm not concerned with the weight very much...... That being said, the consensus is that the tires are over filled with Rim...

Good Idea, I live on hill property that will be easy to try.

My lathe is kind of a mess but here it is.