I really have no good reason to trade. I wish my ex2900 had more foot room and room for getting on and off. This is really only an issue in the winter when bundled up. Also, I had been using a slightly oversized blower for a couple years and now the rear hydraulics creep slightly when loaded...
I have a finish mower on the back right now and I've noticed that every minute or 2 the hydraulics kick on and raise it. It's drifting down. This is during idle and I've never had this problem before. If I shut the tractor down I can hear the mower creak as it slowlyyyy sinks. The last 2 years...
I have a finish mower on the back right now and I've noticed that every minute or 2 the hydraulics kick on and raise it. It's drifting down. This is during idle and I've never had this problem before. If I shut the tractor down I can hear the mower creak as it slowlyyyy sinks. The last 2...
I have a 721CTS
http://www.loftness.com/Literature/filezone/index.php?path=./SnowLogix/Obsolete%20Snowblowers
The pto shaft calls for (2) 5/16"x1" grade 5 bolts. The small sprocket on the blower's chain drive calls for (2) 3/8"x1" grade 2 bolts. The large sprocket calls for (2) 7/16"x1.5"...
I sure am. Ditched the plow and and am having a blast hammering on all the snow we've gotten. Ordered edge tamers for the bucket this weekend too. We get drifted in like crazy so the blower saves the day!
How much do u guys let your tractors lug down when running the blower? Ours is hst with pto speed at 2600. I usually run 2500. It will go down to 2300 or 2200 rather often. I never let it go below 2000. Is this typical for many?
How far does the wire go into the metal connectors? Should I strip more of the wire covering? Where do I crimp and where do I not? I am sort of an idiot! Trying to hook up LED lights to my harness. Thx
So I ordered a couple 27 watt lights and the opt7 dual harness and received them today. I want to mount them on the rops where the halves hinge together. I want to run the bolt that holds the hinge assembly through the light bracket. It will require me to get a bracket with a larger hole as well...
I searched but couldn't find what I'm looking for. It's either this or edge tamers!! I'm just looking for something simple on the bucket for light snow/manicured surface since I've finally got a blower on the rear for the heavy stuff
I have a yanmar ex2900 that currently has wolfs head ht in it from the dealer. The dipstick is telling me to add fluid. I can't find it by the quart anywhere. Is it ok to add a quart or so of something else like the traveller premium fluid or do I really need to buy another 5gal pail of the ht...