Recent content by apeckham

Thank you for the idea

Have a question that I'm hoping someone has a fix I have a 2638 HST , the peddles on the right side ie forward and reverse peddles are 2 1/2" off the deck. The peddles on the left side ( break peddles) are 5 3/4" off of the deck. I can operate the forward and reverse peddles with my heel on the...

Probably

I have a woods RC6 rotary cutter which I am in the process of servicing. I removed the plug located on the rear bottom of the gearbox and drained the oil. I then removed the top vent to fill it back up . At this point I checked the owners manual to find out how much oil to put in. It said to...

When was the last time you changed the fuel filters? I own a 2638 also,and I started hearing a hissing noise. Looked at everything but no luck. When I recently did the 500 hour service I found the problem. It was coming from the air box, one of the clamps that holds the box together had come...

Where did you get the funnel?

I own a 2638 and Lately when I'm operating the tractor moving forward will creep when I let off of the peddle. I have greased the zerks that I have found, and I have shot wd40 onto the other joints. Still doing it, any ideas as to what to try next ?

I haven't heard of that one before. I'll give it a try and see what happens

I have tried everything that everyone has suggested to no avail. The only thing I haven't tried yet is shutting the machine off to shift to neutral or another gear

Yes, it has done it since it was new

My tractor is a hydrostatic drive, no clutch. I've tried stopping, slight forward pressure,slight backwards pressure , four wheel drive,two wheel drive,tractor shut off. Nothing seems to help😡

I own a 2019 2638 hst When I try to change from one range to another I have to hit the handle with my hand as hard as I can to get it to change. I've tried nudging the forward and reverse peddles,lowering the rpms nothing seems to help. Any suggestions?

Hi all, I own a 2019 2638hst and to me the front differential seems very noisy. This is while running it in mid range 2 wd . I checked the oil in it and it was ok. Does anybody else have this issue with their tractor?