Recent content by Aprice0101

Bingo, that's my next move to reinforce the weld area. Thinking 2x2. .250 wall aware tube and some plate to link rear axle then I'll figure something for the front

Pics of weld and back in tractor on its own weight. Checked for cracks for welding with dye penitrate, so far so good.

Pics

Update: with the block being fudged anyways, I'm going to be attempting a welding the block up with muggyweld 77 and 3/4 bevel. Will post updates as I'm going in case it works and someone else is in a similar boat. Engines out and apart waiting for welding Roda to get here and some degreaser.

First two are same crack on starter side

Hey how y'all folks doing tonight? Ran into an issue on my tc35da, got four cracks running down at the rear of the block. Not having any luck searching for one, anyone know where I could find one?

Hey there, I resealed some leaking points on my injection pump on my to35 with a 23c diesel, and tried to time it and put it back on, however, I have a slight problem... The typical pages say say to turn the engine to #1 TDC to when the 1/4 round rod sticks through the check hole into the hole...