hi i have a farmall 140 with culvators the shanks keep tripping when i cultavate i am only setting them down a few iunches but they trip also tryed tighting the big nut on top of spring still no good so i bought 2 new shanks from ag supply i tightened the big nut all the way down so...
Hi guys i have a farmall 140 culvator that the culvator shanks trip when barly in ground i have tighened the big nut on the springs still no good bought new ones from ag supply sam e proble can the shanks be spot welded tacked so they do not trip and were is the best spot on shank foot...
hi guys i have a 1951 john deere a that last year pulled my 12 ft kba disk no problem in 3 gear now if i try that it stalls tractor out so i tryed 2 gear it pulls it but i get smok cumming from clutch housing not sure whats going on any help thanks art
hi guys i have a 1951 jd a that last year pulled a 12 ft kb a disk no problems in 3rd gear now if i try to pull it it in 3 gear it about stalls tractor so i whent to 2 gear and it pulls it but smokes comming from clutch housing not sure whats going on any help thanks art
hi were is a good place to get rear tiers for a john deere 40 t 11.2 x 34 looking on net and tiers are more than the price of tractor i am looking at thanka art
hi i have a 3 bottom 1000 johndeere plow that trips to much it has toggle linkks i did the adjuctment taking out the shims still no luck i need to replace toggle links any one know wrer to get them j d does not carry them ant more thanks art
hi i have a m6060 kubota with a la 1154 loader on it when i tried to put the loader all the way down to lift up the frount of tractor it does not lift it not sure why on any other tractor i had i could lift the front end off the ground any help thanks art
hi i have a 2015 kubota m6060 yhat when i am disking lightly about 3 inches the tractor randomly loes power the rpms drop from 2200 to 900 and engine lugs down almost stalling i called my kabutoa rep and hes said to change fule filter i did vthat same problem it randomly loes power note...
Hi i have a 1949 cub that i need to add an external coil to it is a 8 volt postive ground magneato set up but the internal coil is bad does anyone have a digram of how to wier the external coil to the mag thanks art
hi i have a koubota m 6060 4 wheel drive tractor loaded rears and front loader is my tractor big enougth to pull a white 348 mounted 3 bottom 16 inch plow thanks art
Hi i am buying a new kubota m 6060 the inurance kubota offers is nice but seems pricy about 450 a year o n this tractor what other insuances are out there that may be better thanks art
hi i have been looking at the speces for a jd 5065 e and kubota m6060 i see that the jd has a 179 cid motor for all there e modlels from 55 hp to 75 hp were kubota has a 203 cid for its 6060 63 hp and 71 hp 7060 why is deer using the same motor over so maney hp ratings from 45 to 75 hp any ideas...