Recent content by ArthurHA

  1. ArthurHA

    Filled Tires or Ballast Box?

    Fill tires! Then add equipment, be safe.
  2. ArthurHA

    CK35 Burned Out It's Clutch AGAIN?!

    That can be expensive repair, I have been in the construction and woodland farming for over 50 years, and I have never had a clutch problem, I found with the forward/reverse levers, I did not have to use the clutch very often, The tractor I have now, a Yanmar 359, has a clutch, but after...
  3. ArthurHA

    Modifying a quick hitch

    Not all equipment works with quick hitches, I use a shot piece chain at the top connection, easy to hook and un hook
  4. ArthurHA

    Tractor Shopping

    With that much land go for a larger machine 35-60hp. You will need a grader blade for your road 7ft A back hoe is expensive and too small a one will not do the stumps very good unless they are all softwood. I just traded for a new Yanmar yt 359 what a great machine warrenty for running gear,10...
  5. ArthurHA

    What Do You Do With Your Waste Oil?

    I poured it on my fire wood pile, by the time it is in for burning, it is dryed and doing a good job as it goes up the chimney.
  6. ArthurHA

    YT359 Joy stick question, front loader

    I have only 35 hours on a Yanmar 2019, 359, and the Joystick causes a question, pulling Up, and left into the corner of the range, the UP lift stops, and I can hear the pump struggling, I do a quick movement out of the corner, and the lift continues, there are no other "dead" spots on the...
  7. ArthurHA

    Starving for fuel Chanenger (Massey) M265B

    Where do I find the RPM limiter, did not see it in the book. The tank seems clean, and the filter is clean, I have blown out the pipes, worked for a while then back to it's tricks again. Just to tell about the fix, it was a small rock, blocking the tank bottom fuel feed, a vacuum took care of...
  8. ArthurHA

    Starving for fuel Chanenger (Massey) M265B

    Will run at full speed then looses its rpm to almost off, but picks up the rpm (fuel) again, and keeps doing it over and over, the fuel filter is clean and it has full flow of fuel. This started after about an hour of working properly. can not find any leaks. All cylinders are firing. It...
Top