Recent content by avanbre

  1. A

    Clutch orientation

    I found a clutch splitting g procedure on keno tractors website. The long end of the hubs face toward the back end of the tractor, thank you. Quite interesting putting a tractor back together that you never saw together
  2. A

    Clutch orientation

    I got a basket case jinma 284, do the longer splines of the clutch packs face the engine? I hVe an 8" dual clutch
  3. A

    is the satoh s670 engine fir a satoh s 650g

    JUST WONDERING IF ANYONE KNOWS IF THE S 670 DIESEL WILL FIT IN TO THE S650G?
  4. A

    ignition timing for s650g

    what i see are two notches on the crank pulley, i have to assume 1 is tdc, the other ??? btdc, if i look to the front of the engine which notch is tdc and what is the other, anyone know? also i have seen 6 btdc, 10 btdc and is this with the vacuum hose for the advance disconnected?
  5. A

    s650g governor

    the governor was making loud clanking noise, took it apart and the only issue was the two bearings and a seal, bearings were 6200,6203 and the seal was a 16x30x8 applied industrial had the bearings and they had a 16x30x7 seal, cost about $18 . cleaned it all up and put it back together...
See more

Footer Links 1

Top