AW East Texas's latest activity

No, I haven't tried the address you give me yet. I will probably send them a new msg with the address you give me tomorrow.

Looks pretty good. I believe my next move on mine will be to put some double sided knife cutters coupled with my aggressive factory...

Well alright Charlie, you will see a big difference in the way it preforms. I just run mine this evening for about 30 min. I wish I had...

What I did : 1. Remove cover and I took a leaf blower and cleaned out all of the dirt and debris...

Well, I guess so, it took me about 2 hrs. to do a 30 min. job. I went slow cause I was guessing how the china man who built this would...

Oh I forgot to mention, when I did my checks on my RPM's I was running my machine @ 2500 rpm's

Where did you get the manual ? All mine came with was the plastic box with some replacement parts, 4 cutters, bolts, another belt, etc...

Alright, I will try that email. Before you do that, see what your setup is actually doing. Digital tach from Harbor Freight or Northern...

Here is my Cat Skid Steer. The pic of the pulley's is how they are set up now. It was originally reversed.

On the raytree mulcher, there is a square collection block in behind the green plate that is under the hyd. pressure gauge. There is...

I used the email on the mulcher. The email address I used was info@raymondy.com. I have probably put around 20-30 hrs on this little...

Lineman I have one of these too. Have not had any luck with raytree replying to my emails for parts or operating manual. I have been...