Recent content by AW East Texas

No, I haven't tried the address you give me yet. I will probably send them a new msg with the address you give me tomorrow.

Looks pretty good. I believe my next move on mine will be to put some double sided knife cutters coupled with my aggressive factory mulching teeth. Those things are kinda expensive though.

Well alright Charlie, you will see a big difference in the way it preforms. I just run mine this evening for about 30 min. I wish I had thought about this from the start. The pieces it mulches up are so much finer now. It still isn't a high flow, but I am doing it for myself so I can go slow and...

What I did : 1. Remove cover and I took a leaf blower and cleaned out all of the dirt and debris. 2. Record the tension bolt for correct belt tension on reassembly. I used a set of what I call spreaders. It is like a compass you use to make circles. I also...

Well, I guess so, it took me about 2 hrs. to do a 30 min. job. I went slow cause I was guessing how the china man who built this would have put it together. I really wish I had of made a video of doing the job. I haven't ruled that out yet, but I can tell you how I done it. But first I would...

Oh I forgot to mention, when I did my checks on my RPM's I was running my machine @ 2500 rpm's

Where did you get the manual ? All mine came with was the plastic box with some replacement parts, 4 cutters, bolts, another belt, etc...

Alright, I will try that email. Before you do that, see what your setup is actually doing. Digital tach from Harbor Freight or Northern or online... Keep me informed.

Here is my Cat Skid Steer. The pic of the pulley's is how they are set up now. It was originally reversed.

On the raytree mulcher, there is a square collection block in behind the green plate that is under the hyd. pressure gauge. There is some sort of adjusting screw under the left hand side of the block assembly. I adjusted it out about 3 turns and absolutely nothing happened. This was before I...

I used the email on the mulcher. The email address I used was info@raymondy.com. I have probably put around 20-30 hrs on this little mulcher. It does do a pretty decent job, but on bigger trees I have to make several passes on them to get em chewed up. I usually end up leaving the bottom 15 ft...

Lineman I have one of these too. Have not had any luck with raytree replying to my emails for parts or operating manual. I have been using mine for a couple months now, and it does a decent job. I have been doing a lot of web browsing and have run across many threads on the subject of tuning...