Recent content by Back40Bob

  1. B

    JD 5093 implement operation and RPMs

    ok - good enough - thanks for the reply.
  2. B

    JD 5093 implement operation and RPMs

    I have noticed that my farm loader (bucket), snow plow are very sluggish when machine is at idle RPMs. Is this normal? I serviced the hydraulic system, changed out all filters including the strainer and still have the same sluggishness. If i crank the RPMs up to 15K, the implements seem to...
  3. B

    JD 5093E farm loader issue

    The book says every 600 hours - i know it has not been 600 hours since last hydraulic oil and filter change. Where would i find the screen to make sure it's not clogged up?
  4. B

    JD 5093E farm loader issue

    probably too many - i will check those for sure.
  5. B

    JD 5093E farm loader issue

    My farm loader is very sluggish. It along with any attachment. I have to have RPMs very high in order for it to respond to controls. How would you suggest I troubleshoot this issue?
  6. B

    JD GX345 engine wont start / dies after starting, runs fine other times

    I suspect i have a problem w/ neutral safety switch - symptoms are engine won't start - getting fuel/air. Sometimes it will start right up, other times it won't. When it does start, it runs perfectly and then will suddenly die - like you got up off the seat. This is why i think i have a...
  7. B

    JD 563 Farm Loader

    Just bought a new JD 5093E tractor. I was out of town when it was delivered but my ranch manager was there. It came w/ a 563 farm loader. But, to his surprise, it was black - not JD Green. It was also narrower than the width of the tractor. We suspect this is the wrong bucket. Can anyone...
Top