how do i go about getting it un air locked.
has any one pulled the steering wheel off.
he took it off the first time and it came off easy.
he put it back on with an air gun and now the steering wheel will not come off.
the three holes that hold the Mitshibishe button on don't seem to be threaded...
i bought a GC2300 with power steering cylinder was off it.
rebuilt it got it back on and dang is was PITA.
had to take the flywheel off.
anyway got it back on and pretty much all the hydraulic line was leaking.
so i took them off and went and had new ones made.
i marked the steering lines as...
update on this.
i had to rebuild both cylinders of the FEL boom and it fixed the problem.
and i have had to pretty much rebuild every cylinder on it.
fel and back hoe but she is a strong little tractor now
the oil is not milky
the backhoe is strong.
"Usually air goes away by itself when you run it a bit" how long is a bit ?
i put hydraulic oil into the rear end. i guess i was thinking that the pump was in the rear end and would not have a hose form the sump to the pump.
but this is when i get...
Dang ruffdog. i know your name has ruff in it, but don't be so ruff :p.
No i think those hour meters are notorious for going bad on the bx24.
no water in the oil.
not a flood victim as far as i know.
have not changed any fluids yet.
i have been reading the TBN for years and not sure why i have not joined until now.
i am tractor poor. to say the least, lots of junk but they still run and do what i need them to do.
Ford 801 gas first tractor i ever owned. built a man an EMU hatchery in trade for this little jewel( probably...
thanks for the vote of confidence on NO POS.
i extended all the cylinders. and checked the fluid and it is about half way up the hatch marks on the stick.
"How many hours?"
i wish i knew. hour meter is not readable
" Fluid levels are correct?"
yes i believe so
would a video of it help?
the...
thanks guys for the quick answers. So i will try and answer each question.
just brought the tractor. and yes the hydraulic fluid was low.
hour meter is not readable.
no history at all got it from a auction house.
assumed the weak loader was due to be low on fluid.
added some universal udt fluid...