BCLoco's latest activity
-
BBCLoco reacted to MF RED in MT's post in the thread New Root Ripper design BH-2720, CB-65, CB-75, CB-86, BH3222, CB-05, 2375, CB-10, CB-20, 1580 with
Good Post.
Hi Gofast, I would like to know what grade metal these rippers are fabricated from. Also do they have a sharpened edge or is it just... -
BBCLoco reacted to Gofast's post in the thread New Root Ripper design BH-2720, CB-65, CB-75, CB-86, BH3222, CB-05, 2375, CB-10, CB-20, 1580 with Good Post.
I would like to know what grade metal these rippers are fabricated from. The blade it 5/8” A36 Steel top plate is ½” CB – 05 ears that...
-
BBCLoco reacted to Gofast's post in the thread New Root Ripper design BH-2720, CB-65, CB-75, CB-86, BH3222, CB-05, 2375, CB-10, CB-20, 1580 with Good Post.
This is a new more aggressive design. It is getting great reviews. It works well backward and forward. Also check out the new website...
-
BWith that setup you can add remotes fairly easily; using this as an example. Find out which of your two main lines is the pressure feed...
-
BThis not too difficult and I have done this on my 2022 GC1723EB. You need an open center spool valve with pressure beyond port/sleeve...
-
BWhen you mention backhoe you get me nervous. Have you removed your backhoe already and if so what did you do with the hydraulic lines to...
-
BMake sure they are competent because if they mar or make an indentation on the ram it will leak from then on - they destroyed the ram.
-
BYes. I have a 1760 with the 2814 FEL and I bent the same side you did. I believe mine happened when a branch came through my grapple...
-
BBCLoco replied to the thread Bent bucket roll cylinders.Don't listen to the person making asinine comments about abusing your loader. He has no idea what happened and he obviously doesn't know...
-
-
BI have always done a fare bit of backdragging with my front end loader but never at full extension of the curl cylinders and almost...
-
BCertainly true. Problem being is cylinder rods are not really designed for compressive force when fully extended. In tension there’s no...
-
BQuite common, actually. Watch out when back-grading with FEL bucket at full dump. Especially if you have a loader with only 1" rods...
-
BI have a Massey E 2860 with a FLX 2815 loader. Has anyone heard of the role bucket roll cylinders bending? I have a 40 year old John...
-
BIf you have pallet forks, you might try using them to fluff the pile. There is less resistance as the compost falls between the forks...
-
BThink the process is learning how to lift.... You are supposed to come into edge of pile and scrape up with lip of loader.... Not bury...
