The tractor is a Branson 2610 with the BH100 Back hoe. It happened when I was moving a bucket load of dirt with the front loader. I was driving up a hill and didn't notice the engine straining more than I would have expected driving a load up a hill. I also only had had the tractor for 10 hours...
Has anyone ever installed a bypass valve or pressure relief for the aux hydraulic circuit? I bought a new compact last spring with a back hoe. One of the hydraulic couplers to the backhoe failed and separated. This this was on the return line and the pressure blew out the valve body for the...
Is there any online resource for JD parts? JD parts web site sends me to a dealer. That dealer is over an hour away on any given day (there's a bridge involved that is always backed up with traffic.
This is for a 1984 JD650 so a bit on the older side.
Thanks
I have tube style rod ends on my old Kubota. 4 of the 7 hydraulic cylinders on the machine have bent and pitted pistons to the point the repair place I took them to to said they wouldn't rebuild them. Kubota wants $1400 each for replacements, and I can't find aftermarket cylinders with the...
I want to test the hydraulic pumps on my kubota. I borrowed a hydraulic gauge that reads to 5K psi and it is tee'd with a flow control valve and line that can dump to a bucket or return to the fluid tank. I was going disconnect the output of the pump, plug the gauge directly into the pump and...