beenthere's latest activity

No theories forthcoming from dealer is quite understandable, because your explanation about what is happening is so very confusing...

on the way

Are you talking about a deck from a round fender 110 or 112 being mounted to a JD 210? I didn't think there was a 46" deck fitted to a...

Suggest testing the battery (or have it tested) under load. I'm thinking a new battery is due or past due. But also remove and clean...

"Battery good" ?? How did you check that it was good ??

Maybe you can guide this woman to explore and advertise her "parts" tractor. Could always put it on Craigslist in the "free" section...

Welcome to TBN Which transmission ? Hydrostatic or SyncShift ? Sounds like your load match or speed match switches are causing some...

Doesn't help the OP answer the question "which fuse goes in which slot ?" Tech manual needed and might try the dealer as they should...

Assume you can buy the service tech manual for your model. Have you tried that route?

Seeing some similarity to this junker and the JD 4020 that is shown in this video of a 4020 being overhauled. Might help with your id...

Possibly a 4000 series in the early 60's, but look for the serial number tag, not at the foundry cast numbers that are shown. This link...

The part number for the non-powerflow bagger is JDWBM16790. I would be astounded if you could actually walk into a Deere dealer (or...

I think this link will take you to JD parts for a bagger system for the JD 175...

Welcome to TBN Member oldnslo has good recommendations to start with Your LA is a beauty. I had the LA model back in the day (actually...

Have you the part number for that connector ? Have you checked with the Deere dealer ? Welcome to TBN