bgr's latest activity

Is it fairly easy to uncouple the engine from the generator? That might narrow down which one it is. Your are also correct in saying...

This post started as "open frame inverter" so the generator part is very different from an older conventional unit, basically just an...

Go to the end of your owners manual and look at the parts picture or download on from HF website. The engine has two ball bearing for...

You might try to see if you can buy a warranty extension now from an HF you have not visited

Gas thank you for that information. I don’t necessarily want any unpredictable voltage on my high priced Chinese appliances. Very...

I have a dump trailer and it is very handy but for any large amount of material it is more economical to pay a full sized dump...

I have a 78" Bestco HD with 3" hammers. Put the rpms up, tilt the front of the mower up, and slow down. Clumps do happen in very heavy...

Looks good. I thought you might try having counter rotating spindles. You might have to reinforce your baffles of you're cutting...

Hi, Background: Here is a project I started about 2 years ago. Since I retired (2016) I've wanted to build a rotary cutter that...

I didn't say skid steer, I said track loader. Cat 963, Dresser 125, John Deere 650. These are not skid steers. These machines have...

Based on machine never staying in your possession due to partners position, I'd being looking at negotiating a long term rental or 3...

Here is my twenty five cents -- thats two cents with inflation. Many years ago I worked for a dealer that sold snowmobiles and noticed...

The line I am using is Gator Magnum supertwist .095 and .105 sizes. I also use the same in a fixed length head which grips individual...

I think that's where it's located. The timer connector will have four wires, Black - ground Red - 12v always Red w/white stripe - 12v...

I had the same problem on my L2550. a close look at the fuse box showed that one of the brass connections on the fuse box had rusted...