Recent content by Bjohn

I have a 1991 955 with a 60" belly mower. When I turn off the pto it throws the belt off the center pulley, ANY SUGGESTIONS?

I just stripped sandblasted and painted a belly mower for a 955. I put it back together but the blades are spinning off when I turn the power takeoff off. Does anyone have any suggestions? I tried not putting the protective metal cup back on thinking that was keeping the blade from seating...

I noticed fuel leaking on what looks to be the fuel line going into the top of the engine on my 955. It is going onto a brass tube before an end cap that looks like it serves to let the brass tube then go into the top of the engine. Does anyone know what size tubing this is and if I replace it...

I changed the hydraulic oil filter. The manual said to fill the filter 1/3 of the way full, I did this and noticed the dipstick was reading over full by a bit. I used the tractor a couple times and it is leaking oil around the housing where you connect the oil filter. I tightened the filter...

Anyone have any suggestions what to check first on a tach and hour meter on a 955, just bought this tractor and not sure whether it might be the cable, tach of both.

I have a john deere 955 and the tach and hour meter don't work. I just bought the tractor so I'm not sure when it broke. Any suggestions on what to check or replace?

Can anyone tell me what primer I should use when I take the paint off to bare metal to keep it from rusting? I'm considering using spray cans on a mid mount mower, any suggestions? If it would make that much difference I could use a wagner. I've seen some enamal paints at tractor supply for use...

I want to strip and paint my 60" Mid mount mower. Iam considering having it sand blasted and using a primer and painting. Does anyone know the proper primer to use under the finish paint. I'm considering using spray cans because I don't have a sprayer. I probably could borrow a wagner if I...

Does anyone have any manuals to sell for a 1992 955 with four whell drive?

When I use my 92 955 my reverse pedal isn't retracting the whole way back when I leave off the pedal. Any suggestions?