Blondie70's latest activity
-
BI'm still beating on it. Pump looked great inside, went back on. Radiator at shop, guy said his chemicals pretty good. I'm real...
-
BAgree with Dodge Man. They do run on the hot side. I've owned 4 Kubotas and maintained 2 more. Every one of the BX ran almost to the...
-
BTake the thermostat to Napa, they can probably match it up with another by size that is rated for lower temps, or just replace it with a...
-
BIf you drop down a gear in the tall grass will the tractor still get hot? I don't like to run my tractor hot; not enough margin for error.
-
BBlondie70 reacted to TORQUIN's post in the thread Kubota V1702 engine - Is 200-250 PSI too low compression to run? with
Good Post.
A trick for starting a diesel without starting fluid, is a gas-soaked rag over the intake. This is safer than starting fluid as all that... -
BBlondie70 reacted to Bob435's post in the thread Kubota V1702 engine - Is 200-250 PSI too low compression to run? with Good Post.
I have several Kubota engines various equipment some with several thousand hours on it. My skid loader has the V1702 engine. Only had...
-
BLikely the glow plug relay or the relays connections.
-
BBlondie70 reacted to hayden's post in the thread Kubota Bell Housing Drain Plug Leaking,L series, 47️⃣40️⃣ with Good Post.
I've only recently learned about this common oil leak in the Lxx40 tractors. I'll probably jix myself, but I sure am lucky that mine...
-
BBlondie70 reacted to Kubota 2007's post in the thread Kubota Bell Housing Drain Plug Leaking,L series, 47️⃣40️⃣ with Good Post.
Keep your fingers crossed, it took 15 yrs for mine to leak.
-
BWell, I was being facetious as I did indicate that I presumed 'the former' option of your being mischevious. ;) Nevertheless, SAE...
-
BWhere this should take the thread is towards the conclusion that you are either being mischievous ;) or that you have a poor...
-
BI don’t have access to you model of machine. However, it’s not hard to convert inches to mm. Multiply the length value in inches by 25.4.
-
BBlondie70 reacted to Doug Vee's post in the thread Kubota Bell Housing Drain Plug Leaking,L series, 47️⃣40️⃣ with Good Post.
The L48 looks like it could be a pretty good size job. The main frame that the loader, backhoe and the ROPS/FOPS looks like a pretty...
-
BBlondie70 reacted to Kubota 2007's post in the thread Kubota Bell Housing Drain Plug Leaking,L series, 47️⃣40️⃣ with Good Post.
My 4740 has gotten worse, leaks when parked. Monday I split tractor and ordered all parts. Parts including filters came to $303.00, I...
-
BBlondie70 reacted to Doug Vee's post in the thread Kubota Bell Housing Drain Plug Leaking,L series, 47️⃣40️⃣ with Good Post.
I would be interested in this subject as well. My L48 is a little drippy from the same location. Not sure if my equipment and skill set...