bmaverick's latest activity

I had a DIY project to add a hiller to my Yanmar, use DirectTV satellite dishes.

I've got that BS here as well. I went over the river and bought tubes there.

Switch to direct wire LED T8 and ditch the ballast. Run both bulbs in parallel. You will have to change the ends in the fixture to...

The sale of Florescent lamps is banned in California for all intent. I have a hospital full of 4’ T8 overhead lamps which can no longer...

A PTO driven rotary tiller can in fact have hillers on their back end. In Asia, they do this. Here, very rarely. Here is a Mitsubishi...

I have an amazon special version of THIS and it's way easier than the one you posted, I've used it and it works most of the time but the...

Thanks, that is a great find for the video. Even knowing there is a tool for balancing. I've learn more with this YT vid than many of...

I've done a bunch of tires with mine, I've beefed up some areas that were starting to bend from use. I also added a duck bill to aid in...

A permanent mount where you can get all around it would eat up too much floor space, so I made a quick slide on base for one of my fork...

I made some pressure treated legs that I can bolt on and off. That really helps! Some have bolted to a pallet as well. If you can bolt...

Sixtyfiveford has a a good video on using this changer, also talks about some mods that make it work better.

I have used it for 15" tires and 12" trailer tires. Gotta be anchored solid!

Did you click on his Japanese link above, then in the box center near the bottom type in MT266 . . .

When you look at any type of gear shift tractor, there are three areas to consider. When I was looking at tractors, I found it took a...

Thanks for all of the responses. Loader work only accounts for about 10% of the work this tractor will do. My most interest is crawling...