Recent content by botaman2

Having electrical problem,was wondering if anyone would have a wiring schematic for L3010 Kubota?

This will be my Kubota's 6th. winter,So far she has performed flawlessly.The combination of front and rear blades work well. She can push thru some real deep snow with no problem. The front blade is 6 1/2' Meyer's plow that I added hydraulics to. The rear blade is 7' grader blade on my landscape...

In response to SEON'S question about TL on BH.

Unable to find many web-sites that sell HTL's(hydraulic top links).Do any TBN-ers know of any?

Yesterday's storm gave me the opportunity,to use my new LR/grader-blade combo. MY 7' landscape rake used to be a seasonal implement,but now it will be used year round.The flip down grader blade worked great for cleaning up behind the front blade. I also plow my neighbors drive that is all...

Anyone out there have any insight with the CDP backhoe thumb kit?

Got the old Stickler out of mothballs,still works great! For those members not familiar with the Stickler,It is a screw type pto wood splitter. I run it 237rpm PTO speed (1100 indicated) seems to be a good speed for splitting.I've split wood up to 12' in diameter. The length I keep around 3-4'...

Rotary cutters are hard to move.On a hard surface I use my 2x6 with 4" swivel casters,clamped to the housing,moves like a baby carriage. Airborne moves I use the sling hook method,also works great.

I always carry my lift kit with me.They are stored in my on board tool box. The bucket hook is rarely used on it's own,I use it mainly in conjunction with the lower eyebolt/connector combo. The eyebolt is forged with a 3/4" shank.I generally just hand tighten the nut on the shank for easy...

Did a little job today at my son's house,took a picture before leaving. Trip out and back went well.(103 mi.) Tractor is a Kubota L3010 HST,backhoe is a 9' Wallenstein,trailer is 18' Cam Warrior(9,999#) rating.TLB weight is 6500#,trailer empty is 2100#.

Recently purchased a flip down grader blade for my 7' Landpride landscape rake. To get everything set for my primary planned use, a few mods were in order. I mainly got the blade to plow snow with,when the ground is soft,and to plow crushed stone drives. Having the wheels should prevent the...

Another closer view

Old Meyers snow plow mounted to Kubota L3010. Fabricated sub-frame to fit tractor utilizing loader mounts. Also added hydraulics to raise and lower (float)blade. Also added power angle.Also made some structural changes to plow "A" frame.

How do you move a 1400# backhoe? Build a B/H dolly

Plan on backhoe purchase in spring,undecided as to power from pto/or internal hydraulics. Will be used on Kubota L3010HST.