Recent content by breamer999

  1. B

    Ford/New Holland Model 1920. Hydraulic question

    I know it is rated at 7.8 GPM, what at what pressure? Im am looking into a 20 ton hydraulic splitter and want to know if it is matched ok
  2. B

    1920 wont start...read on

    Tractor been sitting for two months. Turn key, glow plug light lights up, lights work, flashers on, no sound, no clicking just silence. Where do I start? Battery drained to 55% of full charge after attempting to start Temps outside about 32F. Tractor outside covered in tarp. Fuses OK
  3. B

    Snow Attachments  Snow Blower for Ford 1920 (Looking at a Kubota B/L 2563)

    Attached pics. Assuming it is in good condition, any opinions as to whether this is a good little blower for a 3/4 mile lane? I live in Prince Edward Island where we can get 118 inches of snow a year. Average snowfall is about 8-10 inches. Ideas, comments?
  4. B

    Snow  Pushing snow with a 1920

    Ok, I'm a relative newbie so here goes: I have a 1995 NH model 1920. I have put relatively new 13.6x24 Ag tires on the back. New auto winter tires on the front, very aggressive thread, but nonetheless, limited to 2WD. I could not find AG for front in time for winter. I am also having...
  5. B

    Snow  New Holland 1920 2WD for snow plowing?

    When I replaced my turfs with the 13.6 AG tires in May, I did not bother with the front tires. Now I realize whoever had this tractor put different rims on the front. The front tires are standard (albiet bald) car tires, 195/65/15. According to the manual, the fronts were 5.50-16. So, money...
  6. B

    Ford Model 1920 Range Selector Lever prob.

    I started my tractor up after about a month and it will only operate in the lowest gear (range selector pulled all the way back). When I slide the range selector forward and try to move the main shift lever or shuttle lever, it wont lock in place. Ideas?
  7. B

    Ford Model 1920 Tire/Rim help

    I purchased a 1995 Model 1920 with turf tires. I am new to the tractor scene, so bear with we for a few questions. 1) I am having extreme difficulty finding rims for this. I was told by my neighbour I could get any 24" rim and cut the bolt pattern out of the existing rim that is with the...
Top