Recent content by BrewWizzard

Bingo! I pulled on the brush guard and the noise went away. So the bell like “ringing” was that. nooe. New tractir, new fuel, put in additive. It was the bell sound that bothered me; found the rattle

I was just researching this. Basically, most single axle trailers are 3000 lb, while 2 axle trailers are 6000 and up. Since the trailer weighs a good deal, you’d need at least a two axle trailer with brakes. However, like others, I’m struggling to identify when I’d use it. My son have a 12000...

I took delivery on a new CX2510 about a week ago. Other than screws rattling loose on the brush guard, it seems to run great, although I’m uncertain if a couple things are normal or not. The diesel noise is loud when the pistons fire; I expected that. But there is a marbles, bell ringing kind...

There is much discussion about CK being better for having three speed tranny. Going up a hill in second is an example of where it’s better. Having 3 speeds. Somewhere on youtube I saw someone testing going up a hill in high, then doing an engine tweak for more HP. Both stalled; the one with...

Seen your posts. Why don’t you try suing your dealer rather than wasting time here.

You are right! I just took delivery yesterday. The front tire outer dameter is 23”. I had been looking at the CK 3XXX series at one point; probably confused them. Still, the CX tire diameter is bigger than the CS series. TYM and many others are missing dealers in my area. Of course, there were...

I should have said CX 2510. It has a way bigger front tire, a 10-16.5 which should mean a 30” diameter, and has 14.5” ground clearance. That’ll get me across the creek. The CS (subcompact) has the same front wheel size as my garden tractor, which is very small, and the ground clearance is about...

I’m pretty much sold staying with the larger (compact) one, after reviewing other posts. I should probably redirect this to a CX features post, or maybe Kubata comparison, as that’s the other nearby dealer. My Kiota dealer had a CX2510 built with a hydrstatic trasmission. I’m not particularly...

I’m a newbie, so I don’t know what “ReGen limit” is. Can you explain, or direct me to more info? Thanks

I absolutely agree in terms of capabilites except for “Ground clearance” and easier rolling in very uneven ground. Have you used it in very uneven ground? And how does the LS MT125 compare to the CS2110 in terms of tire sizes and ground clearance?

**** Edit **** I’ve decided to go with CUT instead of SCUT I recently went to the local Kioti dealer and looked at a CX 2510. I have an an unusual , but small lot with a seasonal creek and a lot of sagebrush and Bitterbrush on it that I need to remove. I also need to flatten some areas remove...

Sure sounds like a great deal to me. My local dealer seems to have pretty good deals as well