Alright so this is a semi update on my injection pump failure but I didn't want to jinx anyone. :laughing: I now have 74 fun and trouble free hours on my machine and she is running great. My failure happened at 35hrs or so if memory serves me correctly.
Started building a boulder retaining...
First let me say thank you so much to everyone on this forum for your help. This is truely an outstanding forum!
Update: I called the dealer closest to me (50mi) and basically he told me to get lost because I didn't buy my loader from him which was $500 more from him than another dealer that...
Ok, I'm with you on everything except quoted here. Now the governer exterts rearward force on the pin by a level it looks like. I can see that by looking in the hole how it would push the pin on the rod backwards.
As for the throttle spring that's the big spring in the photo, the one on the...
Thanks to another forum member for messaging me I opened up the oil fill flange, the piece in the picture below with the orange cap which is mounted just in front of the injection pump.
This next picture below is looking inside of the oil flange after removal and towards the front of the...
My other posts mention me installing the loader... I have figured that apparently that was a coincidence.
I had my tractor running shut it off and now it won't start up. I have went through the fuel bleed steps and have no fuel coming out of the injector nozzle holder, while I do have fuel at...
I have a shop manual and I'm putting it to use but could still use some advice...
I went through the steps of bleeding the system. My fuel bowl is full but I did that step as well. Then went to the fuel bleed bolt note in picture with a "1". I unscrewed this a little and fuel leaks out. Crank...
Tractor has been running fine 39hrs. I have been working on installing a loader. I finally get to the point of hooking up the hydraulic lines tonight. Turn on the tractor no problems, running fine. Slowly tapped the loader lever to move the loader and the rams started to respond.
I then shut...
Thank the Lord I have a new loader! I picked it up two days ago. 200+ miles round trip but it was worth it.
The loader, with the neighbor gone and his tractor not around... How would it get down...
Out comes "The Engine Hoist" as the wife looks on with a 27 degree cold Bud Light...
My son...
So the loader for my tractor is a KL130. I spoke with a dealer out here who is not Kioti and he knows a man who has a old new loader (it's been sitting but was never used apparently) unfortunately that loader is a KL1450... So anyone know if it would work? I could probably get it for $1500. I...
Yup, me again. Since I got my light trouble taken care of I figured I would work on the tach. It only goes up to 500rpm while I'm using it at idle it's dead.
I received a wiring diagram from a forum member and according to that it says if your tach isn't working it could be the pickup sensor...
I went out this evening for my first run doing tractor work. Just picked up a box scraper from my neighbor. Someone should have told me these things are so much fun! What I got done in just over an hour would have taken me months. Actually it probably would have never happened. I filled in some...
Thanks to everyone so far for helping me out with my questions. We bought our property about 2.5 years ago and I'm so stoked about my new to me tractor!
I have a gear tractor. I just want to confirm. While in high you need to use the clutch to shift and you need the clitch to go from forward...
My tractor is a couple years old with 32 hours just picked it up if you missed my electrical thread. The manual says every 50 hrs to grease the fittings. It also says to apply a little.
So my question is. Can I just pump grease in there until it comes out or are there rubber bushings in there...
New owner here. I've been wanting a tractor for a couple of years now. I got an outstanding deal on a CK30 and brought it home last Wednesday. She has 32 hours. Essentially brand new! Tires still have the moulding on them. All smiles and so are the kids they love it too. No toys on it though...