Recent content by btwoods

Thank you oldnslo. I'll track that service manual down.

To the best of my knowledge they are disengaged. When I pull on the PTO lever I can see the metal bar push up on the switch. The switch is housed inside the rubber boot so I can't tell what is going on mechanically on the inside of the switch but from the outside it looks like everything is...

When you say cables are you referring to the wires and wire connectors? I have not cleaned anything on the tractor. I did look over the various wire components running from the ignition switch to the engine bay. I did not notice any breaks or cuts. I pushed on the ignition switch connectors to...

I was able to crawl around the tractor today in order to look at switches. Everything seems fine with the switches unless something internal is wrong. No debris was found that could block anything and when I moved levers back and forth the switches appear to be moving back and forth without any...

Thank you, I'll take a look at those locations and see what I can find. No clicking noise when the key is turned. I'll let you know what happens.

My teenage son was brush hogging a pasture with our my Branson 2400H when some old fencing wire got caught up in the mower. He turned off the tractor and started removing the old wire from the brush hog. When he finished removing the wire he could not get the tractor to start. The battery is...