Recent content by bubbashank

red black wire is only giving me 3.5 ish volts i followed that back to the second picture which is “Main 60a”

i’ve followed it back to the fuse box and am only getting 3.5 ish v from the fuse box what could it be before the fuse box

For anyone just joining i’ve narrowed it down to it being my positive wire to my starter

i check d those and the alligator clip is a charger i installed

i did it and it worked, the positive wire going to the ignition is jumping from 2.8 to 3.4 to 4.2 to 5.4 back and forth randomly and spontaneously

it was a bad reading but i’m still only getting 10v from it

i’m getting 12.6 from the negative terminal and 12.6 from any other metal on the machine

it last ran a few weeks ago it’s been sitting outside in florida for about a month but it’s ran great the whole time all the connections are clean no repairs it got wet from rain but nothing super bad. i am getting about 1.6 v to the key switch when it’s off, 0.8 when it’s in accessory and 0...

i’m reading 12.6, terminals are tight and pretty clean and i can’t really tell if there’s a main fuse

It has a good battery in it i’ve checked with a multimeter. screen won’t turn on and it won’t turn over, i’ve checked most of the fuses related to the screen and ecu but i don’t know what to check next.