BufordBoone's latest activity

Had a grease fitting on my tractor that wouldn’t take grease and I tried a bunch of times with different grease guns no luck. About six...

Good info. Thanks!

Now there's something I didn't think about. Hell, I didn't even know there was such a thing. Since I can't turn it, I expect it will...

I don't think I explained the part correctly. What I called the "quick attach piston" is that pin which has an angled base. It is...

Got a grease zerk that won't take grease. I've got one of the tools that you put oil in and tap the piston to clean the zerk. Although...

With about 4 hours of mowing time now, I am very satisfied. To me the ride is good, and I cut some very rough areas...just to see. If...

After a lot of research, I bought a 54" Kubota 422KW. Main factors: The Kubota dealer has treated me very well with service for my...

I've looked at those more than once. Would love to give it a try but they are expensive.

Awesome suggestion. That should tell me a lot. Thanks!

Well, if you do decide to get rid of it, let me know! I need a heavy one! David from jax

I think the blade is 8'. I'll try shortening the top link. Didn't think of that last time. Thanks.

I was thinking of this while reading all the replies. I'd leave the rake teeth exposed about 1" to loosen lodged gravel/ crushed stone...

What a great idea! The thickness of the 2x6 would also help prevent it from digging in and moving dirt as well as the gravel I want it...

My issue with my rake is that too much gravel goes between the tines. That blade attachment looks like it would help in that regard.

I do the same to get gravel "back to the surface" This question, however is about getting it moved from the sides back onto the top.