Recent content by c-and-a

  1. c-and-a

    Box Blade - existing lawn work

    I have spent hours reading threads on box blades, so I apologize if this seems like an old topic... I need to reseed an existing lawn - my plan was to use a box blade to scrape up top-layer of growth, mostly weeds/crab grass, but some existing grass as well... remove the clumps and then add...
  2. c-and-a

    BX Coolant Flush - revisited

    Hi Folks: Sorry for resurfacing an old topic...but, I have read this post: http://www.tractorbynet.com/forums/kubota-owning-operating/91025-bx-coolant-change-need-help.html As this is from 2006 - just making sure people agree with this approach, and is there agreement on using anti-freeze...
  3. c-and-a

    Finally finished the ROPS light project

    Here is the final result - I wanted front/rear light on separate circuit and to have the lights and ROPS wiring removable. Magnetic lights, switch, waterproof PVC box, marine 12/2 wire bought from eBay Replaced lighter plugs and receptacle with PartsExpress version (great quality) Marine grade...
  4. c-and-a

    Another work light project

    Hi Folks: After reading all the threads and great ideas, I am now starting my light project... Anyone have experience with these? eBay Motors: 12 Volt Magnetic Halogen Worklight Flood Light (item 270311356161 end time Dec-31-08 10:01:04 PST) Seem decent, good price - protective cover over...
  5. c-and-a

    Mowing  Should know better about mowing with BX2350, but...

    I have had my BX2350 for over 100hrs, mostly mowing, some FEL and some plowing - but I continue to play with the mowing settings and can't seem to get them right! I am curious for those that mow with the 2350 what height setting you mow at - and more importantly, what hole setting do you place...
  6. c-and-a

    Another work light question

    Just curious if anyone has bought these lights? Looks like a pretty good deal to me based other threads I have read. Feedback welcome 12V Magnetic Halogen Worklight
  7. c-and-a

    Here is what I learned from TBN

    Ballast threads are abundant - so here is what I learned from TBN Make is close - tight to the tractor Don't make it top heavy And always have a good dolly to make mount/unmounting easy... It's a drain pipe left over from street work, cut down and filled witgh concrete, and a tool holder (4"...
  8. c-and-a

    BX2350 - PTO lever "sticking"

    For the first time today, I moved my PTO lever from mid+rear to just mid... I was blowing leaves instead of bagging... Once I was done, I had a heck of time getting the lever back to mid+rear to finish the job with a quick mow/bag... Any thoughts on the difficulty or tricks to help, when she...
  9. c-and-a

    Rookie Question - cleaning hydro filter

    Manual recommends using a "non-flammable solvent" - I am sure I am overlooking the obvious, but what are people using...? I am having no luck finding anything "non-flammable"... Feedback appreciated
  10. c-and-a

    Oil & Fuel  BX2350 - the infamous second fuel filter

    From looking at the pics in the manual - best guess it is underneath the platform? As I started my 50hr service - changed the fuel filter in the engine compartment, changed the engine oil/filter - without removing MMM... front axle to follow.... I have to remove the MMM (and bagger) for tranny...
  11. c-and-a

    BX2350 - 50hr coming this weekend

    I know this topic has been beat to death - I have read several threads top to bottom full of tips/tricks - I am feeling very confident but have one remaining question that I am sure many may laugh at...but I have to ask... When replacing the fuel filter - the only tip I have seen is to duct...
  12. c-and-a

    A long-time, loyal member needs our help!

    Many of you know KubotaBilly, either seeing his posts on TBN or maybe his handy work on Ebay...either way, he has befriended many and he needs our help. His wife of 36 years is struggling with a rare and untreatable form of cancer, she is only 57 years old. Please take a moment and say a...
  13. c-and-a

    Aerator and Dethatch - finally made a move

    After following several threads, I finally outfitted my 2350 with a core aerator and front-mount dethatch... I have used the aerator, worked very well - it can be filled with water for additional weight (filled it 3/4 full) - draining completely was interesting. I now need to figure out front...
  14. c-and-a

    Finally the slush pusher took its maiden voyage

    We had our first snow/sleet/rain storm that left enough slush to give it a try...and it worked as expected - it's one mighty squeegee... No issue back-dragging and no issue dumping the FEL - very limited wear on the rubber. So I am very pleased with the outcome. I realize I do not have a...
  15. c-and-a

    My Slush Pusher - driveway saver

    Thought I would share pics of my slush pusher - basically desiged to protect the driveway and walkways from my FEL... Believe it or not - it weighs over 100lbs fully assembled...
See more

Footer Links 1

Top