Recent content by cabover4us

I feel sick because I don't do what you guys do, I run my Yt235 like my John Deere 855. Only run my rpms high when using the pto. Example, few days ago filed pot holes on our road tractor idled for 2 or 3 hours I then started shutting it off. Next day finished with few more buckets and then...

The picture of information on my post was given to one of the branches of Emrich Sales and Service. Charlton and South Glens Falls were sold to Salem Farm Supply so the Emrichs in Melrose, NY is the only Yanmar around our area that I know of. Anyway parts people are tracking this for me with...

My good friend has a Bobcat gasoline sise by side. He did a cab and doors nice and tight but was having cold engine issues with that 20 Honda twin. He bought the 8000 btu diesel heater mounted it put a dirverter on the output heat to split it 1. Went into cab and 2. Went under unit to go into...

I have a couple shafts with the implement side has the slide on yoke with a soft bolt that's tightened up, I don't remember the Allen head bolt at all on either one.

I used a 12" auger on my John Deere 855 drilling 4 foot holes for a 6' vinyl fence, I did three holes and had to quit and use backhoe. I can't believe I didn't ruin the filings on the auger drill pulling out huge rocks.

Hello gang, I bought an older commander Cyclone Rake with the smaller bag size 285 gallons about 2 summers ago from an elderly man (93) 3 miles from my house ($600). Put just a zinger ad on Facebook just asking if anyone out there getting rid of their cyclone rake. Tried marketplace turned out...

Okay, I hit send before I realized I wasn't done with that last post. More info. OK this is called a Warranty Update. Top of Form YT235TLB and B75 Backhoe Kit Lift Link and Safety Label Update-Mandatory Issue No. U-DD17-00158 Product Category Tractor Revision history New Administration Number...

An aside to that I noticed one of my lower 3 Pt arms was missing the square turn buckle. The left arm, drove to South Glens Falls to Emrick Sales and Service. They had them in stock, but they had the original smaller ones, the ones I need are longer the squared part is like almost 2 inches...

I have an oops to report, 3 month ago I decided to take backhoe off, needed some york rake work. Was able to use vice grip to grab pin end and gently tapped on vice grip to move pin out, worked relatively well. After the work dropped attachment and proceeded to investigate pin problem. Removed...

First time reporting this issue dealership in South Glens Falls did a measurement of the pump pressure, it was low, put it to maximum specs. For quite awhile it seemed fine, my tractor is a 2017 with 200 hours. This past summer we bought 29 wooden sections of six foot high fence on sale. Didn't...

This past week was a working vacation, some heavy work some light. Took off my backhoe off of my Yt235, and having trouble with the right hand arm pin that connects 3 point hitch to tractor, it's so tight I can barely push it in and out. And of course you can only use the tips of your fingers to...

When we bought our 235 they offered 48 zero percent so we took the deal back in 2017.

I till my two neighbors gardens with my 235 and a 5 foot tractor-supply tiller I bought used. The one up above is Harry's about 30 x 25 and Daryls is 20 feet by 60 to 70 long twice a year each. Dont seem to have any problems, my old neighbor (pasted on)has an old 4 foot Woods tiller with a small...

I love my 235, but I have open cockpit no cab, I'm the one on route 22 end of road dressed like a mummy in winter.

I have a question for you guys and gals, on bucket I want to add chain hooks just like my old JD855, but would you recommend putting flat plate down first and then welding on hook? Or hook directly welded to bucket. On my JD855 to top of the bucket had a folded end on top and I added 3/8" angle...