careyo63's latest activity
-
careyo63 replied to the thread Yanmar YM Series Tractor Toolboxes.Org. All the little stuff! Pins,Pliers etc.. Big Box to the 3Pt.. Seen one on a Quick Hitch. Easy to access and attach a big tool box... -
Why not the best of both worlds? ;)
-
Brand M Parts in Midland, Texas, sells a temperature gauge kit for the YM Series Yanmar tractors. https://brandmparts.com/products/tg0052
-
careyo63 replied to the thread Adding Guages To your Yanmar.I considered changing the Temp. Sensor to Gauge. In the summer I've had the Temp. light come on a few times over the Yrs.. Last time it...
-
careyo63 reacted to CloverKnollFarms's post in the thread TYM wants to tip or roll over - need advise with
Good Post.
Next post. TYM front bearings need replacing already. Yep -
careyo63 reacted to 2manyrocks's post in the thread TYM wants to tip or roll over - need advise with Good Post.
I suspect just having a bush hog on the rear 3pt will exert quite a bit of counter leverage due to its length. Not having anything on...
-
careyo63 replied to the thread TYM wants to tip or roll over - need advise.loaded tires on my 63 Ford no PS. and it helps with traction. With a FEL. I use a old International BH. just for counter balance on the...
-
careyo63 replied to the thread Some good clutch advice (long post).My 2 stage ford clutch was stuck. Found the CL. needed TLC!!!. Sent it to the shop! it had other problems with the shifter. Stuck in...
-
careyo63 reacted to thepumpguysc's post in the thread Ford 2000 3 cylinder diesel not firing with Good Post.
U have to make sure that fuel is getting TO THE PUMP INLET.. THE DPA pump has 1 rotating member that feeds all the cylinders, so it’s...
-
careyo63 replied to the thread Rear rims for Yanmar 240D.The 63 ford Org. does have bolt on Rims and the Ym2000 Org. Wheels and huge lug Bridgestone tires are welded wheel rims one piece, 1345870
-
careyo63 replied to the thread Front Hyd. Pump for Tractor.I don't know for sure the GPM. flow rate. It's small and the only thing you can clearly read is Vickers vane pump. The numbers I can see...
-
careyo63 replied to the thread Front Hyd. Pump for Tractor.Loader. The Hub Adapter can stay just loosen the hyd. pump and pull the shaft. Super easy!
-
It could certainly be done but no one I know of offers a kit. A 3 point power pack is more common
-
careyo63 replied to the thread Front Hyd. Pump for Tractor.I run a Hyd. pump off the Eng. crank shaft. The Fel. frame is the Hyd. fluids reservoir. It's all self contained. If I ever would need...