careyo63's latest activity

***UPDATE #2 07-17-2025*** Look at all the copper!! I spoke with my mechanic and he sent me a few pictures. He thinks the head gasket...

Pressure up checked the cooling the Sys.. How high did it Get ? Hopefully just the water Port. Until he pulls the head and checks it for...

Probably that too but just pulled off distributor cap and found the cover for the points had broken half into. Couldn't find all the...

The #7 bolts the one in the middle is sure enough bent! Grind it. ? Why it's recommended to replace them.

I'm showing Fredricks YM1500,2500,2610. HBN-4300 Nut, Head bolt and HBW-3338 Washer only those 3 models also. You can see how unusual...

Looks like a lot more copper than spray in that damaged head and Block. Rolled it on. It's oozing out and that's a legit opinion from...

Copper coat head gasket spray is used a lot where one of your surfaces has not been resurfaced. I have used it several times myself with...

I'm with Travis_R. I've been there! Wow! You know what they say when the _hit hits the fan. Good grief!! I know better!! There was a...

Carey, I agree with you.

Peter, I truly do wish all this wouldn’t be happening. This has literally been a nightmare and a MAJOR headache. I have honest to God...

@Travis_R I think that it is a bit like having a wonderful present taken away, regardless, I hope that you get better sleep and that...

I use to work at a Machine shop. We rebuilt Engines. My job as a teen was tear down. I was responsible to disassemble and check if the...

Ghetto rig job!! call it what you want!!

To my eyes, that thin black line is visible in the video that you posted above, around 1:35. I hope that this gets resolved soon. If...

Who added the copper rig job! I see no reason for it unless the Eng. block is warped. They missed it? Fredricks put the copper patch and...