Recent content by careyo63

YM1601 4WD. 19 Eng. HP. 3 Cyl. Gear Drive. Prod. Yrs. 1979-81 YM1602 4WD. 19 Eng. Hp. 3 Cyl. Gear Drive. Prod. Yrs. 1982-83 The YM1610-1610D Eng.19 Hp. 3 Cyl. Power Shift. Prod. Yrs. 79-81 The Ym1601 1587Lbs. and the Ym1602 1521Lbs. I thought that was odd. 66 Lbs. lighter ? I show the Hyd...

A Roll pin Roll over Huh! On video?

The Org. Yanmar overrun has a bearing. Where the Grease Zerk is attached in the Pic.. I removed it so it wouldn't get broke and attach it back to Serv. it. Remove the Zerk and get to the set Pin. Which I believe is the correct way so it won't beak the gears Etc. Why did they use a solid shear...

My overrun clutch is setup with a pin and hard to see or get to for that matter. You have to line the outside to the Pin on the PTO.. My FM 95% of the time so never have to remove it! If I did it would be spring loaded so I could remove it easy. Old and new if I was going to remove it. The...

UTDA Disbanded 10 Yrs. ago. I'm thinking yours wasn't refurbished and a local tractor dealer. Just a guess!! The refurbished YM2500 from Fredricks looked brand new. It was UTDA in 2009. Not a scratch on it. My Org. YM2000 I purchased in 2008 same dealer. The muffler and seat was replaced and...

Big plus and he can tell you how your setup! Or what maybe a potential problem etc.. How my thermal start warms the Cylinders. looking through the air cleaner with the top removed. 2cyl. so it's super effective! 811330

Clutch Packs. Several disks and pressure from Hydraulic fluid is how there engaged.

Have a good charge on the battery. Cold start is going to be the first thing to get familiar with. My Diesel in Ga. I rarely have to use a Thermal start to warm it up. I've had to before and it works. My Yanmar drips fuel on a electrical coil to create heat in the motor. I have lever that will...

Take it to them. Which I had a good idea how the warrenty worked. For me it would have been a few miles back to the dealer. No big deal at first. Then I went down. The YM2500 had a leak @ the hyd. pump seal. My guess the PTO. lift lock. We knew this and to repair it I would need to bring it in...

Interesting! The YM2000D and the And the YM2010D use the same Gear, front axel. . SG-1352 YM195-2420 no Ym1500 etc.. Better get a good file!

My guess the YM1500 and the YM1510 uses the same Gears. The 1510 does not show up in my book. So many models listed. Fredricks Importing parts. Try them they may have it.

My 63 Ford has a 2 stage clutch. 1 disc. for the PTO gears another for the main drive. I can disengage the Drive with the clutch pedal and let the PTO stay in operation. As long as I shift the PTO in gear like the YM2000. Nice option!!

Uphill or down also?

The QM are nice! Many Hrs. on this 5103 641958

Watched it happen not long ago. Neighbor on a 8n-? and a BH.. Acre lot in the back yard. Couldn't stop it! Took out some small trees on the property line that did stop it. Eyes as big as softballs! INKY. :oops: