Recent content by Carl Bert

I sometimes leave my Kubota B26 with the same tank of gas for 2 years or so. How long can you keep the same fuel in a tank before it goes bad? I use the best fuel additive on the market, just not sure how long that extends its life. Thanks in advance

I would like to know if anyone has figured out where to put the jumper wire which enables a JD2032R to mow in reverse without having to pull up on the RIO switch. I did this on my X595 and it works great. A friend of mine just bought a 2032 and would like to do the same. Any help would be...

Anyone know where I can get a tooth bar for a bucket with a bolt on cutting edge? I found one place that wanted $350 for a regular tooth bar and $700 for one for a bolt on cutting edge. Doesn't make sense why there would be such a big difference in price. Anyway if anyone has a link to a good...

Can anyone tell me what PH tester is worth buying. I know nothing about these or what to look for to find a good one. Any help wold be appreciated.

I just installed a linear actuator on my JD 47" snow blower. A guy on ebay is selling these kits all set up with the wiring harness, switch, bolts, everything needed and step by step instructions, it even includes JD logo stickers. It works great, worth every penny. Here are some pictures:

I'm thinking of buying a set of pallet forks. I don't have much storage space and I won't leave anything outside, so I was considering the clamp on style forks. Can anyone tell me if they are worth buying?

Here's my little B26. Great machine.

Here is a picture of the incline. Its the area on the right, can't quite see the whole incline, but best I can do.

Not sure how this will help, but here they are. You think 2500# is a lot of weight for an 18' trailer? I thought it was pretty average.

I couldn't believe it. I have an 18' 2500 lb trailer, which I used to pick up a piece of furniture. When I got it home, I decided if I pulled the trailer up on my lawn to my front door it would make getting it inside much easier. We had just had about 6" of snow fall, there is maybe 3" left...

You just described what I call, a perfect day. Wax the tractor, admire it for a while while drinking a good glass of wine, then take it for a ride. All along my dog sits and watches. Just not sure which one I enjoy cleaning up more, the orange or the green.

Anyone know anything about the UHMW cutting edges for snow plows? Are they worth buying? I was thinking about putting it on a 54" plow that I bought for my JD X595. I have a somewhat rough blacktop driveway, and just curious how long I can expect it to last and what kind of abuse it could take...

Do the X7xx series tractors have a float position for the front blade?

Instructions say to drain front and rear axles. Why would i drain the rear axle? I can only assume they mean (even though they dont state it) to do that for a full time 4WD tractor like the x748. The other question I have is, it doesn't say to pack the bearings with grease, so does that mean...

To start off, does the GX335 have the hydraulic deck lift? If so the snow thrower is an easy setup. It hooks up in about 10 minutes tops. I had a GX345 with the snow thrower and loved it, wish I still had it. I don't remember if I had to install a front lift kit or not, but even if I did, it...