I'm reposting hoping for more insight from the wiser (and probably greyer, but then again I'm bald so I shouldn't throw stones) heads around these parts. Also, someone else might be able to get some help from this thread as well.
So in my previous post I mentioned that I was having a problem...
Hey ya'll,
Transmission seems to be acting up on my MT 125. With high gear or low gear it seems to take a lot more effort to provide power from the pedal to the drive and there is a weird sound that is slightly different from the hydrostatic whine, almost like a vibration. Still moves but if...
What's the proper reading of the dipstick? I notice that sometimes the dipstick reads empty, like when the backhoe is extended, and sometimes full. Any advice? Also, is there an hydraulics bleed screw?
Thanks!
9" new auger bit on a used Land Pride posthole digger. Tractor is an LS MT 125, 24.6 HP.
I'm not exactly sure what the problem is. When I engaged the PTO and lower the bit into the ground the PTO takes off really fast and then starts to bind after about a foot. So I reduced the PTO speed, but...