Recent content by CenCalLS

Wix WL7426 is what fit mine, see attached list from Rockauto

Gearing up for my first service on my XR4150H, I believe I got these WIX numbers correct. Question though, the Hyd filter (51715) says it has a 35 micron rating. I thought I had read on here it was a 10 micron or that I needed a 10 micron. Any help would be appreciated - Thanks

Here is what I welded up for my driveway maint. I was able to order 2 -72" scraper blades off of Ebay for $150 and used an old I beam. My driveway is class 2 base with 3" DG on top for maintaining the crown. It is only a 1/4 mile long but has a switchback and two hills. I only have to give it...

So I finally got around to making a custom landplane for my driveway. I wanted one that would ride on the crown and added a 6" right side offset so I didn't have to drive on the edge. I filled my tote halfway and sprayed water as I graded, worked out great. I wheel rolled it then finished it...

Has this been an issue for anyone else? I wish I had a clue how I bent them but I really don't. I'm guessing while using my grapple a few weeks ago but I surely would have noticed it before now. I have recently used the auger for several holes but the most damage it to the side opposite the...

I'm having alot of fun with front hydraulics. I do need to build a land pland for my D.G. driveway tho, the box scrapper even with top-n-tilt isn't great for feathering out washboard.

The Titan 3000. The spec said it needed 15gpm flow but the technical guy I spoke with at Titan said it would have more torque with the larger motor and spin a little slower. Having hard and rocky soil thought that would be OK. The LS 4150 has just over 8gpm output and I ran it off my rear...

Well I finally got it. I had ordered my tractor a few weeks ago and the dealer delivered it yesterday. I have to say it is a little bigger than I had originally thought about getting! Last year I had looked at the XR 3135 and thought that was the dream machine with a suspension seat, good...