chim's latest activity

I have a 1210 and replaced the original horizontal muffler with a DIY vertical exhaust. Rather than a curved end mine is straight up...

Couple of thoughts: You say you have no experience. Before welding something like the example (lifts 4,000#) I'd get some experience...

I started with a Millermatic 175 sometime in the 90's and was pretty happy. If I had it to do over it would be a MM211. For the...

The only place I didn't use auto safety glass on the cab I built was where it needed to be cut to fit - below the hood. That was made...

I have a 3 point spreader that I have yet to use on my cab tractor. In the same boat as far as activating the gate. I am thinking either...

Even better if it is flat. Replace it with automotive safety glass. For the cab I built back in 2012, it was a simple matter of making...

I have various parts, pieces and extensions, some of which were bought separately that amount to something like the package below. IIRC...

Nice! I'd suggest you add a battery pole saw to your Christmas list. Trees here can need trimmed for the cab two or three times a year.

I didn't invent the "underslung mount" but it does the trick. Here's info from mine back in early 2019...

Every few years when there are big globs - I don nitrile gloves, grab a roll of paper towels and a wooden paint stir stick. The wooden...

The problem I had with the vents is the cap lanyard breaks. I went with drilled holes and rubber stoppers. Most of the time I fill...

Welcome aboard. I can't tell much from the photos. When I was a kid, I spent time working in a local quarry. Limestone in my area is...

I had an L3200 and it was a good tractor. The 3PH didn't operate smoothly, but it wasn't a handicap with the RFM, blade, landscape...

I have spent a lot of time thinking about this over the last few decades, and even still can't find an easy way to compare, because the...

I can't see your property from here, so bear with me. I had a Kubota B7500 years ago. That's as small I'd go. It was a small but...