Recent content by Chuck K.

Not many details but I have a few pics to prove its legit..

Finally a picture.. got the idea looking at my brother in laws dozer..

After digging in hard gumbo rmoving some stumps I once again forgot to take my I/R gun to check temps.. I just think its too hot so I Installed an aux. fan and a toggle switch

I knew it would happen one day and it did,, while stacking a brush pile with my grapple I ran a limb through the brush guard and into my radiator..The good news is the radiator is easy to remove, I JB welded the leaking tube and going back together with it this evening. I am looking for ideas...

Had a chance to do a project on a very expensive home involved moving a propane tank, demo'ing the slab and installing an underground propane tank.. Only problem was my machine would not fit, rented a very clean L39 and was very impressed with the machine. The "shuttle" or glide shift took a...

sticking a 1,700# gun safe through a wall..

May have seen this before but..:D YouTube - Entabulator.wmv

Yes, seems when they replaced the FEL curl cylinder they forgot to install the bushing:confused:.. I Managed to install the new one in place without using a press, the other side had very little wear so I did not replace it.

The bushings where the bucket curl cylinder connects to the quick attach plate. Good news its only 16.00 a side so I am replacing both of them. Click on little picture and arrow points to them.

Buddy of mine is needing some help. He borrowed his father in laws 4200 to mow his lot, while trying to shift from low to high range the rod broke at the transmission. Before taking it to a dealer I thought I would ask here if anyone has had any expierence with this and what it takes to fix it...

While burying a horse for a friend the other day his father approached me asking if I was willing to trade my 24 gooseneck (single wheel/tandem axle) low boy for his huge 40' tandem, dually deckover with dovetail, boards tires in good shape, could use blasting and painting as all his equipment...

Thanks Dmace, its work in progress did not realize it was such a mess when I took those pics for the insurance company. Recently got electronic dart board we enjoy with friends. TRR, that is closed cell, I went with it vs open cell for the additional R-value and most importantly the...

Combination tractor shed/mancave/storm shelter..:D

Having to move trailers around all the time is a pain, plus my license plate on my little pickup is taking a lot of abuse:ashamed: .. I looked at several members idea and came up with this. You real welders try not to laff too hard :D.. I knew I would alway be misplacing the hitch so I...

RKJ 2-3/4" plate weighs approx. 112# PSF, so it should have added about 448#. I did have concerns if I did not like the additional weight so I only welded a heavy small tack in 4 places. I also welded chain hooks to the center of each one if I decided to keep the weight I will finish welding...